Status:operation:enable (?); Status:operation[:Event]? (Query Only) - Tektronix AWG710 Programmer's Manual

STATus:OPERation:ENABle (?)

Group
Related Commands
Syntax
STATus
Arguments
Returns
Examples

STATus:OPERation[:EVENt]? (Query Only)

Group
Related Commands
Syntax
AWG710 Arbitrary Waveform Generator Programmer Manual
This command sets the enable mask for the Operation Enable Register (OENR).
For more information on registers, refer to the Status and Events section of this
manual.
Status
STATus:OPERation:CONDition?, STATus:OPERation[:EVENt]?
STATus:OPERation:ENABle <NR1>
STATus:OPERation:ENABle?
:
OPERation
<NR1> is the enable mask for the OENR. The range is 0 to 65535.
<NR1> indicates that the content of the OENR in a decimal number.
STATus:OPERation:ENABle 1
sets the CALibrating bit in the OENR to "enable".
STATus:OPERation:ENABle?
might return 1 which indicates that the OENR contains the binary number
00000000 00000001, and the CAL bit is set to "enable".
This command returns the contents of the Operation Event Register (OEVR) and
clears it. For more information on registers, refer to the Status and Events section
of this manual.
Status
STATus:OPERation:CONDition?, STATus:OPERation:ENABle
STATus:OPERation[:EVENt]?
: ENABle
Command Descriptions
<space>
<NR1>
?
2-75