System:communicate:lan:rdevice[1|2|3]:Address (?) - Tektronix AWG710 Programmer's Manual

Command Descriptions
SYSTem :
Arguments
Returns
Examples

SYSTem:COMMunicate:LAN:RDEVice[1|2|3]:ADDRess (?)

Group
Related Commands
Syntax
SYSTem :
Arguments
Examples
2-84
:
COMMunicate
<ip_address>::=<string> is the IP address to be tested.
<NR1>=1 indicates there was a response to the ECHO_REQUEST packet.
<NR1>=0 indicates there was no response to the ECHO_REQUEST packet.
SYSTem:COMMunicate:LAN:PING? "2.199.55.1"
might return a 1, indicating that there was a response from the host 2.199.55.1.
This command sets the IP address of the remote host. The host corresponds to
"NET<x>" in the menu display. (You can change this name by using the
SYSTem:COMMunicate:LAN:RDEVice<x>:NAME command.)
System
SYSTem:COMMunicate:LAN:RDEVice[1|2|3]:FSYStem
SYSTem:COMMunicate:LAN:RDEVice[1|2|3]:NAME
SYSTem:COMMunicate:LAN:RDEVice[1|2|3]:ADDRess <ip_address>
SYSTem:COMMunicate:LAN:RDEVice[1|2|3]:ADDRess?
:
COMMunicate
<ip_address>::=<string> is the IP address of the remote host.
*RST has no effect on the value.
SYSTem:COMMunicate:LAN:RDEVice1:ADDRess "2.199.55.1"
sets the IP address of the remote host 1 (NET1) to 2.199.55.1.
LAN : PING
LAN :
RDEVice
ADDRess
AWG710 Arbitrary Waveform Generator Programmer Manual
?
<space> <ip_address>
<x>
<space>
<ip_address>
?