Status:preset (No Query Form); Status:questionable:condition? (Query Only) - Tektronix AWG710 Programmer's Manual

Command Descriptions
Returns
Examples

STATus:PRESet (No Query Form)

Group
Syntax
Arguments
Examples

STATus:QUEStionable:CONDition? (Query Only)

Group
Related Commands
Syntax
2-76
STATus :
<NR1> indicates the content of the OEVR in a decimal number.
STATus:OPERation:EVENt?
might return 1, which indicates that the OEVR contains the binary number
00000000 00000001, and the CAL bit is set.
This command presets the SCPI enable registers OENR and QENR. For more
information on registers, refer to the Status and Events section of this manual.
Status
STATus:PRESet
STATus :
None
STATus:PRESet
presets the SCPI enable registers.
This command returns the contents of the Questionable Condition Register
(QCR). For more information on registers, refer to the Status and Events section
of this manual.
Status
STATus:QUEStionable:ENABle, STATus:QUEStionable[:EVENt]?
STATus:QUEStionable:CONDition?
AWG710 Arbitrary Waveform Generator Programmer Manual
:
OPERation
PRESet
EVENt ?