Awgcontrol:stop[:Immediate] (No Query Form) - Tektronix AWG710 Programmer's Manual

AWGControl
Arguments
Examples

AWGControl:STOP[:IMMediate] (No Query Form)

Group
Related Commands
Syntax
Arguments
Examples
AWG710 Arbitrary Waveform Generator Programmer Manual
:
SSAVe
<file_name>::=<string> specifies the file to store the settings.
<msus> (mass storage unit specifier)::=<string> is the media on which
the file exists:
MAIN
FLOPpy
NET1, NET2, or NET3 Network drive 1, 2, or 3 (specified with
AWGControl:SSAVe "SAMPLE1.SET","FLOPpy"
stores the current settings to the file SAMPLE1.SET on the floppy disk.
This command terminates waveform output. When the mode is not set to
continuous, it also resets the sequence pointer to output the waveform from the
top of the sequence with the next trigger event.
AWG Control
AWGControl:RUN[:IMMediate], *TRG
AWGControl:STOP[:IMMediate]
:
AWGControl
None
AWGControl:STOP[:IMMediate]
stops the output of a waveform.
<space> <file_name>
Internal hard disk drive
Internal floppy disk drive
the SYSTem:COMMunicate:LAN commands)
:
STOP
Command Descriptions
, <msus>
IMMediate
2-41