Command Errors; Table 3-6: Command Errors - Tektronix AWG710 Programmer's Manual

Messages and Codes

Command Errors

3-16
Command errors are retuned when there is a syntax error in the command.

Table 3-6: Command errors

Error code Error message
-100 Command error
-101 Invalid character
-102 Syntax error
-103 Invalid separator
-104 Data type error
-105 GET not allowed
-108 Parameter not allowed
-109 Missing parameter
-110 Command header error
-111 Header separator error
-112 Program mnemonic too long
-113 Undefined header
-114 Header suffix out of range
-115 Unexpected number of parameters
-120 Numeric data error
-121 Invalid character in number
-123 Exponent too large
-124 Too many digits
-128 Numeric data not allowed
AWG710 Arbitrary Waveform Generator Programmer Manual