Figure 2-12: The Code Convert File Format - Tektronix AWG710 Programmer's Manual

Data Transfer
Code Convert File
2-112
The Code Convert file is an ASCII text file that describes the Code Convert
Table as displayed in the Edit menu.
File Format. The Code Convert file consists of bit pattern definitions (see
Figure 2–12).
Sequence of bit pattern definitions
<Bit_pattern(1)><Bit_pattern(2)> ... <Bit_pattern(n)>
Transfer direction

Figure 2-12: The Code Convert File format

<Code Convert File>::=<Bit_pattern(1)><Bit_pattern(2)> ...
<Bit_pattern(n)>
where:
<Bit_pattern(n)>::=[<Past Source>,<Current Source>,
<Next Source>,<Past Output>,<Output Code><CR><LF>]
<Past Source>, <Current Source>, <Next Source>, <Past Output>,
and <Output Code> specifies the bit patterns in the Code Convert Table.
The bit pattern is specified with "0", "1", and "–" (don't care).
For more information about the Code Convert Table, refer to one of these
manuals:
AWG710 Arbitrary Waveform Generator User Manual.
Example. This Code Convert file describes NRZI conversion.
-,0---,,0,0
-,0---,,1,1
-,0---,,0,1
-,0---,,1,0
AWG710 Arbitrary Waveform Generator Programmer Manual