Table 3-8: Device Specific Errors - Tektronix AWG710 Programmer's Manual

Messages and Codes
Device Specific Errors
3-20
These error codes are returned when an internal instrument error is detected. This
type of error can indicate a hardware problem.

Table 3-8: Device specific errors

Error code Error message
-300 Device specific error
-310 System error
-311 Memory error
-312 PUD memory lost
-313 Calibration memory lost
-314 Save/recall memory lost
-315 Configuration memory lost
-320 Storage fault
-321 Out of memory
-330 Self test failed
-340 Calibration failed
-350 Queue overflow
-360 Communication error
-361 Parity error in program message
-362 Framing error in program message
-363 Input buffer overrun
-365 Time out error
AWG710 Arbitrary Waveform Generator Programmer Manual