Yealink SIP T46S Quick Start Manual

Yealink SIP T46S/T48S IP
®
Desktop Telephones
Quick Start Guide
This guide covers the basic features and operation of the
Yealink SIP T46S and T48S IP telephones with Yealink UC
®
Firmware 81 or later. Functionality is basically the same
for both models. Both phones support 16 accounts
For more information, refer to the Star2Star Knowledge
Base.
Phone Screens
The Home/Idle LCD screen is the default view for the
phones.
The Idle screen for the SIP T46S IP phone has a 4.3"
16-bit color LCD:
Copyright © 2024, Sangoma Technologies Corporation. All rights reserved. Yealink is a trademark of Yealink, Inc.
Phone Screens - continued
The Idle screen for the SIP T48S IP phone has a 7" 24-bit
color LCD touchscreen:
Phone Keys
The following keys display on both phone models:
Keys Functions
Menu.
Turns Headset off/on.
Turns Speakerphone off/on.
Mutes/unmutes Speaker.
Holds/Resumes a Call.
Transfers a call.
Connects to Voicemail.
Left/Right selects Accounts or Call Lists.
Up/Down selects Contacts or Entries.
Adjusts the volume.
Confirms actions. Answers incoming calls.
Cancels actions. Rejects incoming calls.
Place a Call
Only one call can be Active at any time.
To place a call, do one of the following:
• Use the handset, headset or speakerphone, first.
Enter the phone number and Send.
• Enter the phone number and Send. Use the handset,
headset or speakerphone.
• Select a Contact from a call list and Send.
Place a Call - continued
To place a new call during an Active call, do one of the
following:
• Press a Line key. The Active call is placed on Hold.
Enter a phone number and Send.
• Press Hold to place the Active call on Hold. Press
NewCall. Enter a number and Send.
Redial a Call
Redial options include:
• Redial the last dialed number: press Redial twice.
• Redial a previously dialed number: press Redial
once to enter Placed Calls list. Use the up/down
arrows to select the number and Redial or Send.
Answer a Call
Use the handset, headset or speakerphone.
To answer a new call while on an Active call, press
Answer. The current call is placed on Hold.
Hold and Resume a Call
When a call is placed on Hold, the caller is "parked"
and unable to communicate with others on the line.
Multiple calls can be on Hold.
During an Active call, select Hold. To resume, select the
Held call and press Resume.
Forward a Call
To manually Forward incoming calls:
1. While the phone is ringing, press FWD.
2. Enter a phone number and Send.
To automatically Forward all calls:
1. Select Menu>Features>Call Forward. Select a Line,
if available.
2. Select a Forwarding Type (Always, Busy, No
Answer). If No Answer is selected, enter the
number of rings or ring time before the call is
forwarded.
3. Enter a forwarding number and Save.
To disable call forwarding:
1. Select Menu>Features>Call Forward and a Line, if
multiple Lines.
2. Select a Forwarding Type > Enter > Disable > Save.
Forward a Call with Find Me / Follow Me:
Set up Find Me / Follow Me in Application Framework
or the portal to forward calls, using the linked
instructions.
July 2019