Deactivating Call Forward; Forwarding An Incoming Call Manually - Yealink SIP-T48S User Manual
T4 series; t4x series;
Hide thumbs
Also See for SIP-T48S:
- User manual (263 pages) ,
- Quick start manual (24 pages) ,
- Quick user manual (7 pages)
Table of Contents
Advertisement
Yealink T4 Series IP Phones User Guide
The call forward mode is set to Custom. Check with your system administrator if the forward on code or off code is
required. If required, get the forward on code or off code from your system administrator.
Procedure
1. Navigate to Menu->Features->Call Forward.
2. Select a desired line.
3. Select a desired forwarding type and select Enabled from the corresponding field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the corresponding field.
4. Do one of the following:
Enter the contact number you want to forward incoming calls to in the Forward to field.
l
For the SIP-T46S/T46G IP phone, highlight the Forward to field. Press Directory (Dir), and then select a desired
l
contact from the Directory list(s).
For the SIP-T48S/T48G IP phone, tap
5. If you select the No Answer Forward option, select the desired ring time to wait before forwarding from the After
Ring Time field.
6. (Optional.) Enter the always/busy/no answer forward on code or off code respectively in the On Code or Off Code
field.
7. Press Save.
The forward icon appears on the desired line. If you activate forward on the default line, the forward icon will
appear both on the line and in the status bar.
Tip
You can press the
All Lines
Deactivating Call Forward
You can deactivate call forward when you no longer want to forward your calls.
Procedure
1. Navigate to Menu->Features->Call Forward.
2. If the forward is activated for specific lines, select a desired line.
3. Select the desired forwarding type and select Disabled from the corresponding field.
For T48S/T48G, tap the Off for the desired forwarding type.
4. Press the Save soft key.
Tip
All Lines
You can press the
Forwarding an Incoming Call Manually
You can manually forward the call to another contact while your phone rings.
Procedure
1. When the phone is ringing, press Forward.
2. Enter the number you want to forward the incoming call to.
3. Press the OK key or Send.
On the T48S/T48G IP phone, tap Forward.
The LCD screen prompts a call forward message.
86
, and then tap the desired contact.
soft key to activate forward for all lines.
soft key to deactivate forward for all lines when deactivating it for a specific line.
Advertisement
Table of Contents
