Joining Two Calls In A Conference; Joining A Transfer Target And A Transferee Into A Conference - Yealink SIP-T48S User Manual

Yealink T4 Series IP Phones User Guide
You can also select a desired contact from the search list, or select a contact from the placed call list or Directory
before you enter the number. On the SIP-T48S/T48G IP phone, you can select a desired contact from the left side-
bar, or select a contact from the Directory or History.
The active call is placed on hold.
4. When the second party answers the call, press Conference (Conf) again to join all parties in the conference.

Joining Two Calls in a Conference

You can select a hold call to join into a conference call with the active call.
Procedure
1. Place two or more calls using the same or different accounts on the phone.
2. Select the desired call for conference and ensure that the call is active.
3. Press Conference (Conf).
4. Select a desired hold call, and then press Send.
On the SIP-T48S/T48G IP phone, tap the desired hold call from the left sidebar.
On the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, press Select.
The active call and the selected hold call are joined into a conference. If there are multiple hold calls, the other hold
calls on the same or different accounts remain hold.

Joining a Transfer Target and a Transferee into a Conference

After consulting with the contact you want to transfer a call to, you can also join the two calls in a conference.
Procedure
1. Press Conference (Conf) after talking with the contact you want to transfer a call to.
The transferee and the transfer target are joined into a conference.
92