Keep Mute; Call Hold; Holding A Call - Yealink SIP-T48S User Manual

The mute key LED goes out on all IP phones except the SIP-T40P/T40G IP phone.
Tip
You can also mute the microphone while phone is dialing or ringing, so that the other party cannot hear you when the call is
set up.

Keep Mute

In a call center or meet room, if incoming calls are answered automatically, the callers may hear your discussion with
your colleagues. You can mute the phone in an idle state to prevent the unintended situation. The mute state of your
phone persists across calls. The phone stays in the mute state until you unmute the microphone manually or until the
phone restarts.
Before You Begin
Check with your system administrator if keep mute is configured on your phone.
Procedure
1. Press the MUTE key when the phone is idle.
The mute key LED glows red except on the SIP-T40P/T40G IP phone, and the mute icon appears on the Idle screen
except the SIP-T42S/T42G/T41S/T41P IP phone.
2. Press the MUTE key again to deactivate the mute state.

Call Hold

You can place an active call on hold and resume the call when you are ready. When you place a call on hold, your IP
PBX may play music to the other party while waiting.
Topics

Holding a Call

Resuming a Held Call
Swapping Between Active and Held Calls
Holding a Call
Procedure
1. Press the HOLD key or Hold during a call.
The LCD screen indicates that the call is on hold.
Call Features
81