Enabling Call Waiting; Answering Calls Automatically - Yealink SIP-T48S User Manual

Related Topics

Enabling Call Waiting

Enabling Call Waiting
Call waiting enables you to receive another call when there is already an active call on your phone. If it is disabled, the
new incoming call will be rejected automatically.
You can enable call waiting feature to avoid missing important calls during a call. You can also set the phone to play a
warning tone when the new incoming call arrives.
Before You Begin
Check with your system administrator if the call waiting on code or off code is required. If required, get it from your sys-
tem administrator.
Procedure
1. Navigate to Menu->Features->Call Waiting.
2. Select Enabled from the Call Waiting field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Call Waiting field.
3. Select Enabled from the Play Tone field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or Off Code field.
5. Press Save.

Answering Calls Automatically

Auto answer enables you to automatically answer an incoming call in speakerphone (hands-free) mode when your
phone is idle.
Note
When you are in an active call and an incoming call arrives on the phone, the incoming call will not be automatically
answered even if auto answer is enabled.
Your system administrator can configure the phone to automatically answer the incoming call after ending all calls. Check
with your system administrator to find out if it is available on your phone.
Procedure
1. Navigate to Menu->Features->Auto Answer.
2. Select a desired line.
3. Select Enabled from the Auto Answer field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the desired line.
For the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, select Enabled from the Status field.
4. Press Save.
If the auto answer feature is enabled for the default account, the auto answer icon appears on the phone screen.
Call Features
77