Screen Saver; Changing The Waiting Time For Screen Saver - Yealink SIP-T48S User Manual

Yealink T4 Series IP Phones User Guide

Screen Saver

The screen saver will automatically start when the IP phone is idle for the preset waiting time. You can stop the screen
saver at any time by pressing any key. When your phone is idle again for a preset waiting time, the screen saver starts
again.
By default, your screen displays a built-in picture when screen saver starts. You can set custom pictures as the screen
saver uploaded by your system administrator. You can also add personal pictures on your phone using a USB flash
drive.
The time & date, certain status icons (for example, auto answer, DND, a new text message), or custom information (for
example, notifications or company logo) can also display on the screen saver.
Note
The custom information is preset by your system administrator.
The SIP-T42S/T42G/T41S/T41G/T40P/T40G IP phone only displays custom information as the screen saver.
Topics

Changing the Waiting Time for Screen Saver

Enabling/Disabling Time & Date and Status Icons Display
Adding a Screen Saver from a USB Flash Drive
Setting the Screen Saver Type
Changing the Waiting Time for Screen Saver
You can change the waiting time for screen saver.
Procedure
1. Navigate to Menu->Basic->Display->Screensaver.
For the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, navigate to Menu->Settings->Basic Settings->Display-
>Screensaver.
2. Select the desired waiting time from the Wait Time field.
3. Press Save.
42