Ending Calls; Auto Redial; Setting The Auto Redial; Redialing A Call Automatically - Yealink SIP-T48S User Manual

4. (Optional.) Select the desired value from the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On Code and Off Code
field.
6. Press Save.
When the caller has anonymous call feature enabled and places a call to your IP phone, the call is automatically rejec-
ted.
Related Topics
Placing an Anonymous Call

Ending Calls

Procedure
1. Do one of the following:
If you are using the handset, press the Cancel key, End Call (EndCall) or hang up the handset.
l
If you are using the headset, press the Cancel key or End Call (EndCall).
l
If you are using the speakerphone, press the Cancel key, Speakerphone key or End Call (EndCall).
l
Tip
You can press the HEADSET key to end calls. Check with your system administrator to find out if it is available on your
phone.

Auto Redial

Auto Redial enables you to redial a phone number automatically when the callee is busy.
Topics

Setting the Auto Redial

Redialing a Call Automatically

Setting the Auto Redial
You can enable auto redial, set the number of auto redial attempts and the time to wait between redial attempts.
Procedure
1. Navigate to Menu->Features->Others->Auto Redial.
For T48S/T48G/T42S/T42G/T41S/T41P/T40P/T40G, navigate to Menu->Features->Auto Redial.
2. Select Enabled from the Auto Redial field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Auto Redial field.
3. Enter the desired time (between 1 and 300 seconds) in the Redial Interval field.
4. Enter the desired times (between 1 and 300) in the Redial Times field.
5. Press Save.
Redialing a Call Automatically
Before You Begin
Enable auto redial feature on the phone.
Call Features
79