Yealink T4 Series IP Phones User Guide
Stopping a Playback
When you finish listening to a recording, you can stop playing by pressing the Back soft key. The phone returns to the
Browse Audio screen. On the SIP-T48S/T48G IP phone, tap
Deleting a Recorded Call
You can delete the recorded calls when you need additional space on your USB drive.
Procedure
1. Navigate to Menu->USB->Browse Audio.
2. Highlight a desired recording, and then press Delete.
On the SIP-T48S/T48G IP phone, tap
A confirmation message is displayed, confirming that you want to delete the audio.
3. Press OK to delete.
Viewing the Available Recording Time
When you insert a USB flash drive to the IP phone during a call, a message will pop up to tell you how much time is
available for recording.
During a recording, if there is insufficient free space (30 minutes or 10 minutes left) on the USB flash drive, the IP phone
will prompt you a message (XX minutes left for call recording). If no free space on the USB flash drive during recording,
recording is stopped and saved in the USB flash drive automatically.
You can also view the storage space of the USB flash drive and check the available recording time before recording,
since the insufficient free space may result in call recording failure.
Procedure
1. Navigate to Menu->USB->Storage Space.
Multicast Paging
Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listening to
a specific multicast group on a specific channel.
The IP phone supports the following 31 channels:
0: Broadcasts are sent to channel 0. Note that the Yealink IP phones running firmware version 80 or earlier can be
l
regarded as listening to channel 0. It is the default channel.
98
to stop the playback.
after the desired recording.