Enabling/Disabling Time & Date And Status Icons Display; Adding A Screen Saver From A Usb Flash Drive - Yealink SIP-T48S User Manual

Enabling/Disabling Time & Date and Status Icons Display
For the SIP-T48S/T48G/T46S/T46G IP phone, you can enable or disable your phone to display Time & Date and Status
Icons on the screen saver.
Before You Begin
You cannot enable Time & Date and status icons display if your system administrator has set your phone to display cus-
tom information on the screen saver.
Procedure
1. Navigate to Menu->Basic->Display->Screensaver.
2. Select the desired value from the Display Clock field.
3. Press Save.
The Time & Date and status icons displays on the screen saver, as shown below:

Adding a Screen Saver from a USB Flash Drive

You can use a picture that is stored in your USB flash drive as the screen saver on your phone. When you set one of
your pictures as the screen saver, the picture is displayed on the screen saver list.
The screen size varies by phone models:
SIP-T48G/T48S IP phone screens are 7 inches (Resolution: 800x480).
l
SIP-T46G/T46S IP phone screens are 4.3 inches (Resolution: 480x272).
l
We recommend you to add a picture less than 2.0 megapixels for T48G/T48S, 1.8 megapixels for T46G/T46S. Either the
smaller or larger picture will be scaled proportionally to fit the screen.
Before You Begin
Make sure that the picture is in the root directory of your USB flash drive , and the USB flash drive is connected to your
phone successfully.
Procedure
1. Press Menu->USB->Browse Photo.
2. Select the desired picture, and then press Preview.
3. Press Set as, and then select Set as screensaver.
4. Press OK.
Customizing Your Phone
43