Rejecting Calls With Dnd On All Lines; Rejecting Calls With Dnd On Specific Lines - Yealink SIP-T48S User Manual

Rejecting Calls with DND on All Lines

You can activate DND for all the lines on your phone. The phone will reject all incoming calls automatically.
Note
If both DND and busy forward are activated on the phone, calls will be forwarded to the configured destination number.
Procedure
1. Navigate to Menu->Features->DND.
2. Select Enabled from the DND Status field.
On the SIP-T48S/T48G IP phone, tap On radio box of the DND Status field.
3. Press Save.
The DND icon appears in the status bar.
Tip
To activate or deactivate DND quickly, press the
Related Topics
Deactivating DND
Icons in the Status Bar
Redirecting Incoming Calls

Rejecting Calls with DND on Specific Lines

By default, the DND feature applies to all lines on your phone. Your system administrator can change the DND mode to
Custom so that you can enable DND for specific lines.
Before You Begin
The DND mode is set to Custom. Check with your system administrator if the DND on code or off code is required. If
required, get it from your system administrator.
Procedure
1. Press DND when the phone is idle.
2. Select a desired line, and then press Enter.
3. Set DND Status to On.
On the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, select Enabled from the DND Status field.
DND soft key when the phone is idle.
Call Features
83