Deactivating The Wi-Fi Mode; Using The Wi-Fi Feature; Connecting To The Wireless Network - Yealink SIP-T48S User Manual

Yealink T4 Series IP Phones User Guide
You can press OK to activate Wi-Fi mode directly and to scan Wi-Fi devices automatically.
If you press Cancel, you can activate Wi-Fi mode manually when you want to use the Wi-Fi feature.
Procedure
1. Navigate to Menu->Basic->Wi-Fi.
On the SIP-T42S/T41S IP phone, navigate to Menu->Settings->Basic Settings->Wi-Fi.
2. Select On from the Wi-Fi field.
3. Press Save on all IP phones except the SIP-T48S/T48G IP phone.
The IP phone scans the available wireless networks in your area.

Deactivating the Wi-Fi Mode

You should deactivate the Wi-Fi mode when you need to connect your phone to the wired network.
Procedure
1. Navigate to Menu->Basic->Wi-Fi.
On the SIP-T42S/T41S IP phone, navigate to Menu->Settings->Basic Settings->Wi-Fi.
2. Select Off from the Wi-Fi field.
3. Press Save on all IP phones except the SIP-T48S/T48G IP phone.

Using the Wi-Fi Feature

When the Wi-Fi mode is activated on the IP phone, you can connect your phone to a desired wireless network.
Topics

Connecting to the Wireless Network

Viewing the Wireless Network Information
Managing the Saved Wireless Network
Disconnecting the Wireless Network Connection
Connecting to the Wireless Network
There are three ways to connect IP phone to the wireless network:
Connecting to an Available Wireless Network Manually
l
Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
l
Adding a Wireless Network Manually
l
142