Sony DVS-9000SF User Manual page 88

Melt settings
The Melt effect melts the image away from a specified part.
To apply the Melt effect
With the Melt menu displayed, use the following procedure.
1
2
3
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameters.
Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
88
DME Special Effect Operations
In the <Direction> group, select the direction in which the image melts
away.
Up: Melting occurs upward.
Down: Melting occurs downward.
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Transition Degree of transition
2 Curve Degree to which image stretches 0.00 to 100.00
3 Random Degree of jaggies at melted part
To make wave settings for melting part, press [Border] and set the
following parameters.
Knob Parameter Adjustment
1 Amp Amplitude of waves
2 Freq Frequency of waves
3 a) Amount of wave phase offset
Offset
4 b) Direction and speed of waves
Speed
5 Slant Slant of border
a) Set when Lock is on.
b) Set when Lock is off.
Parameter
Form
Adjustment
Waveform
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–16.000 to +16.000
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
1 to 8