Sony DVS-9000SF User Manual page 84

2
To set the input signal of the back page
1
2
84
DME Special Effect Operations
V: The image turns as it is split from the center into 2 parts: upper, lower.
When nothing is selected (Off): There are no splits and the image turns
from the edge.
Press [Page Turn], then set the following parameters.
Knob Parameter Adjustment
1 Radius Radius of turn part
2 Offset Amount of turn
3 Angle Angle of turn
a) When split mode is H&V
b) When split mode is H
c) When split mode is V
d) When split mode is off
In the <Back Video> group, select the signal input into the back page.
Self: Use the same signal as the front page.
Flat: Use a flat color.
Hue Rotation: Gradually vary the hue.
2nd Ch: Use the 2nd channel video signal.
To select "2nd Ch," it is first necessary to select the second DME on
the keyer using DME.
Adjust the following parameters, according to the selected input signal.
• When Flat is selected
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
• When Hue Rotation is selected
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Speed Speed at which hue changes
Setting values
0.00 to 100.00
–100.00 to +100.00
a)
–0.250 to +0.000
b)
–0.250 to +0.250
c)
–0.500 to +0.000
d)
–8.000 to +8.000
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
–12.00 to +12.00