Device control block in VTR/disk recorder operation mode (trackball type)
Selecting a VTR/disk recorder
To select the VTR/disk recorder to be controlled, in the device selection
buttons of the device control block, press a selection of the [DEV1] to [DEV12]
buttons, turning them on.
Controlling the tape/disk transport
Using the buttons in the device control block, you can control the VTR tape
transport or the disk recorder disk transport.
For more details of the effect of buttons in VTR/disk recorder operation mode,
see "Device Control Block (Trackball)" and "Device Control Block
(Joystick)" in Chapter 2 (Volume 1).
Depending on the settings in setup, you can also operate the VTR or disk
recorder from the standard type transition control block.
For more details of the effect of buttons in VTR/disk recorder operation mode,
see the section "Transition Control Block (Standard Type)" in Chapter 2
(Volume 1).
For details of settings in setup, see "Setting VTR operation button assignment"
(page 256).
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
DEV9
DEV10
DEV11
DEV12
STB
MENU
DELAY
REC
STOP
OFF
START
STOP
VAR
SHTL
JOG
TC
TC
CUE
REW
PLAY
FF
DEV
ALL
STOP
Control of VTRs and Disk Recorders
135