Installing Additional Cables; Wall-Mounting The Ip Deskphone (Optional) - Avaya 1165E User Manual

Installing the 1165E IP Deskphone
To use PoE, where power is delivered over the CAT5 cable, the LAN must support PoE,
and you do not need an AC adapter.
To enable full functionality of your IP Deskphone, connect your IP Deskphone to your LAN
using a CAT5e Ethernet cable. If your network is equipped with PoE, you can power your IP
Deskphone through the LAN port.
To connect your IP Deskphone to your LAN use the following procedure:
1. Connect one end of the supplied Ethernet cable to the back of your IP Deskphone
2. Thread the network cable through the channel marked with the network symbol.
3. Connect the other end of the cable to your LAN Ethernet connection.
To connect your PC through your IP Deskphone use the following procedure:
1. Connect one end of the PC Ethernet cable to your IP Deskphone using the RJ-45
2. Thread the cable through the channel marked with the workstation symbol, as
3. Connect the other end of the cable to the LAN connector on the back of your PC.

Installing additional cables

If applicable, you can plug an optional USB device such as a USB mouse or a USB keyboard
into your IP Deskphone. Connect the USB cable to the USB port on the back of the IP
Deskphone.

Wall-mounting the IP Deskphone (optional)

You can mount your Avaya 1165E IP Deskphone on a wall either by: (method A) using the
mounting holes on the bottom of the IP Deskphone stand or (method B) using a traditional-
style wall-mount box with an RJ-45 connector and 15 centimeter (cm) (6-inch) RJ-45 cord (not
provided).
42 Avaya 1165E IP Deskphone with SIP Software User Guide
by using the RJ-45 connector marked with the network symbol.
The network symbol is as follows:
connector marked with the network symbol.
follows:
Comments? infodev@avaya.com
November 2013