Avaya 1165E User Manual page 269

3. Select Flash Disk device. The contents of the USB drive are displayed.
4. Select the file you wish to copy and then press Send.
5. Select the IP Deskphone as the destination device.
Figure 69: Sample success message for File Manager operation
Copy errors
After a file is selected, there can be multiple reasons why the copy action cannot complete.
The file size may exceed allowed limits, there may not be enough space on disk, a file with the
same name may already exist, or actions on the selected file type may not be allowed
(configuration flag).
Error conditions display a message on the screen, as shown in the following example.
Avaya 1165E IP Deskphone with SIP Software User Guide
You are prompted to select the device to where you want to send the selected
file.
The file is validated based on the file extension and the passing of the validation
routines, and a handler is called for the file. In this case, the image file copies the
images directory of the flash file system on the IP Deskphone.
Any action that is taking some time to complete displays the In progress...
message on the screen
A success message appears on the phone screen displaying that the file was copied
to the IP Deskphone successfully. The following figure displays a sample success
message.
USB flash memory device support
November 2013 269