Avaya 1165E User Manual page 84

Configuring the Avaya 1165E IP Deskphone
Call Answer
Outgoing Call
Call Release
Call Mute
Volume Up/Down
Audio Processing
The following table lists the Avaya USB adapter key mappings.
84 Avaya 1165E IP Deskphone with SIP Software User Guide
Feature
Comments? infodev@avaya.com
Description
You can answer an incoming call by pressing
the Headset key on the IP Deskphone or the
Off Hook (Green) key on the adapter. After a
call is answered, audio data flows between
the IP Deskphone and the headset adapter
through the USB port.
You can make an outgoing call by either
pressing the Headset key on the IP
Deskphone, or the Off Hook (Green) key on
the adapter. When off hook, the IP
Deskphone streams dial tone to the headset.
The telephone number must be dialed using
the key pad of the IP Deskphone. After a call
is answered, audio data flows between the
IP Deskphone and the headset adapter
through the USB port.
You can release an incoming call or an
outgoing call by pressing either the On Hook
(Red) key on the adapter, or the Release
(Goodbye) key on the IP Deskphone. After a
call is released, audio data between the IP
Deskphone and the headset stops.
Pressing the Mute key on the adapter is
equivalent to pressing the Mute key on the
IP Deskphone. After processing the mute
event, the voice path from the IP Deskphone
to the far end is muted. Both the Mute LED
on the IP Deskphone and the LED on the
adapter are lit to indicate the call is muted.
When unmuted, the voice path resumes and
both LEDs go off.
Pressing the Volume Up/Down key on the
adapter is equivalent to pressing the Volume
Up/Down key on the IP Deskphone. After
processing the Volume Up/Down events, the
system volume changes and affects the
volume on the attached headset.
Same as the wired headset. Audio quality is
restricted to narrow band with mono voice
channel only.
November 2013