Basler DGC-2020 Instruction Manual page 85

LSM Comm Failure
LSM-2020 communication failure pre-alarm settings
enabled, an LSM-2020 communication failure pre-alarm is annunciated when communication between an
optional LSM-2020 and DGC-2020 is lost.
ID Missing
ID missing pre-alarm settings consist of a single enable/disable setting
alarm is annunciated when an expected sequence ID of an optional LSM-2020 is not detected on the
network.
ID Repeat
ID repeat pre-alarm settings consist of a single enable/disable setting
is annunciated when two or more optional LSM-2020's report the same expected sequence ID.
CEM Comm Failure
CEM-2020 communication failure pre-alarm settings
enabled, a CEM-2020 communication failure pre-alarm is annunciated when communication between an
optional CEM-2020 and DGC-2020 is lost.
9400200990 Rev I
Q
consist of a single enable/disable setting. If
T
consist of a single enable/disable setting. If
DGC-2020 BESTCOMSPlus Software
R
. If enabled, an ID missing pre-
S
. If enabled, an ID repeat pre-alarm
4-29