Basler DGC-2020 Instruction Manual page 136

Name
Engine KW Over TRUE when the Engine KW Overload 1 Pre-Alarm
Load 1 settings have been exceeded.
Engine KW Over TRUE when the Engine KW Overload 2 Pre-Alarm
Load 2 settings have been exceeded.
Engine KW Over TRUE when the Engine KW Overload 3 Pre-Alarm
Load 3 settings have been exceeded.
TRUE when the Fuel Leak Detect function is configured
Fuel Leak
as a Pre-Alarm and the activation delay has expired.
Fuel Level Sender TRUE when the Fuel Level Sender Fail is configured as
Fail a Pre-Alarm and the activation delay has expired.
Global Pre-Alarm TRUE when one or more Pre-Alarms are set.
TRUE when the High Coolant Temp Pre-Alarm threshold
Hi Coolant Temp
has been exceeded.
TRUE when the High Fuel Level Pre-Alarm settings
High Fuel Level
have been exceeded.
TRUE when an individual generator detects that it had
Intergenset Comm
been connected to a generator network, but has lost the
Fail
connection.
Load Share TRUE when communication from the LSM-2020 to the
Module Comm Fail DGC-2020 has been lost.
Low Battery TRUE when the Low Battery Voltage Pre-Alarm settings
Voltage have been exceeded.
TRUE when the Low Coolant Level function is
configured as a Pre-Alarm and the activation delay has
Low Coolant Level expired. In addition, TRUE when Canbus is enabled and
the Low Coolant Level Pre-Alarm threshold has been
exceeded.
TRUE when the Low Coolant Temp Pre-Alarm threshold
Low Coolant Temp
has been exceeded.
TRUE when the Low Fuel Level Pre-Alarm threshold has
Low Fuel Level
been exceeded.
TRUE when the Low Oil Pressure Pre-Alarm threshold
Low Oil Pressure
has been exceeded.
Maintenance TRUE when the Maintenance Interval Pre-Alarm
Interval threshold has been exceeded.
MPU Fail TRUE when the MPU has failed.
Multiple Contact
Expansion TRUE when more than one CEM-2020 is connected.
Modules Detected
5-6
Description
DGC-2020 BESTlogic+ Programmable
Symbol
9400200990 Rev I