2 ] Installing The Panel Cover - Brother QL-1060N Service Manual

[ 2 ] Installing the Panel Cover

(1) Assemble the LED guide onto the panel cover with the one screw.
(2) Assemble the power button and feed button onto the panel cover.
Screw
LED guide
(3) Assemble the SB PCB ASSY, cover sensor arm R and SB PCB sheet onto the panel
cover and secure the SB PCB ASSY onto the panel cover with the two screws.
Note: Make sure to put the harness of the SB PCB ASSY through the hook of the panel
cover.
Screw
SB PCB sheet
Power button
Panel cover
Fig. 3.2-11 Installing the Panel Cover (1)
Panel cover
Fig. 3.2-12 Installing the Panel Cover (2)
III- 34
Feed button
Cover sensor arm R
Screw
SB PCB ASSY