7 ] The Ethernet Interface Malfunction - Brother QL-1060N Service Manual

[ 7 ] The Ethernet interface malfunction.

The interface malfunction.
Is the Ethernet cable
connected correctly?
Is the interlink cable
(cross) used?
Are the printer driver
and P-touch editor installed
onto the PC correctly?
Is the Ethernet mode
selected in printer property?
Is the waveform of
Ethernet connector normal?
The Ethernet cable is defective.
Replace the cable.
N
Y
N
Y
N
Y
N
Y
N
Y
IV- 9
Correct the connection.
Use the interlink cable.
Re-install the driver and editor
correctly.
Set to the Ethernet mode.
The Ethernet driver or CPU is
defective.
Replace the main PCB ASSY.