7 ] Installing The Bottom Cover - Brother PT-530 Service Manual

[ 7 ] Installing the Bottom Cover

(1) Hold the body cover as shown below, then connect the power supply harness and the PC
interface harness (provided on the PT-550 European versions only) to the main PCB.
(2) Align the front end of the body cover with that of the bottom cover, then fit those covers
together.
• Take care not to pinch the cords between those covers.
(3) Place the machine upside down and secure the bottom cover with four screws.
Tightening torque: 38.2 N•cm (4 kgf•cm)
Figure 2.2-28 Installing the Body Cover (1)
Figure 2.2-29 Installing the Body Cover (2)
II - 33