Brother QL-1060N Service Manual page 98

(5) When the serial number and MAC address are set, the inspection buttons are enabled,
which makes various inspections possible to be implemented. (Refer to Fig. 5.)
- For the descriptions of each inspection, see the section [2-1] or later.
- The inspection order is not specified.
(6) After the applicable inspections are finished, click the "To next check" button and
implement the inspections for the next machine. The serial number and MAC address
are cleared, and the software returns to the state of Step (3).
(7) When the inspections for all machines are completed, click the "Finish checking and
exit" or "X" button and close the maintenance software tool.
(6)
(8) When finishing the maintenance software tool, the inspection history file
(QL1060NtstSE.csv) to control the MAC address, in the same folder as the tool, is
updated and saved. (Refer to Fig. 6.)
Note: Do not delete the inspection history file (QL1060NtstSE.csv) but save.
The tool is closed, and the inspection
history is saved.
(5)
Fig. 5 Inspection selecting screen
Fig. 6 Example of inspection history
6
(7)
Shifts to the inspection for the
next machine.
Select the applicable inspection.