Appendix 1.2 Setting And Use Procedures Of The Maintenance Software Tool (Ql1060Ntstse.exe) - Brother QL-1060N Service Manual

APPENDIX 1.2
[ 1 ] Setting Procedure of the Maintenance Software Tool
(1) Connect the machine to your PC with the USB cable and turn the power supply button
ON.
Note: When new hardware is detected and the "New hardware detection wizard"
(2) Start the maintenance software. (File name: QL1060NtstSE.exe)
(3) Click the "General setting..." button. (Refer to Fig. 2.)
Setting and Use Procedures of the Maintenance Software Tool
(QL1060NtstSE.exe)
screen appears, press the "Cancel" button.
Fig. 2 Setting selecting screen
3