Brother QL-1060N Service Manual page 41

(5) Disconnect the power supply harness from the power supply PCB.
Fig. 3.1-14 Removing the Power Supply PCB and Main PCB (3)
(6) Remove the four screws and remove the ground spring plate and FG harness ASSY from
the main PCB.
(7) Remove the main PCB from the under cover.
FG harness ASSY
Under cover
Fig. 3.1-15 Removing the Power Supply PCB and Main PCB (4)
Screw
Screw
III- 13
Power supply harness
Power supply PCB
Ground spring plate
Screw
Main PCB
Screw