5 ] Installing The Upper Cover Assy - Brother QL-1060N Service Manual

[ 5 ] Installing the Upper Cover ASSY

(1) Insert the tape sensor PCB ASSY into the insert guide.
Note 1: Insert the tape sensor PCB ASSY until it hits the rib of the insert guide.
Note 2: Confirm that you can see the tape sensor PCB ASSY from the hole of the insert
Note 3: Fold the flat cable after assembling the tape sensor PCB ASSY.
Important: When replacing the tape sensor PCB ASSY or insert guide, implement each
(2) Assemble the insert guide onto the upper cover ASSY with the one screw.
Tape sensor
PCB ASSY
Put the tape sensor
through the rib.
guide.
operation described in "APPENDIX 1. MAINTENANCE SOFTWARE
OPERATION".
Insert guide
Tape sensor PCB ASSY
Rib
Insert guide
Fig. 3.2-23 Installing the Upper Cover ASSY (1)
Insert guide
Fig. 3.2-24 Installing the Upper Cover ASSY (2)
Flat cable
Screw
III- 41
Tape sensor PCB ASSY
Upper cover ASSY