Brother QL-1060N Service Manual page 108

(5) After checking the tape feeding operation, press the Cut button on the machine to cut
the tape.
(6) If OK, the "feed and cut test OK" message appears in the "Results" column. (Refer to
Fig. 18.) If NG, check the Cut button, cutter, cutter motor or the like.
(7) After checking the tape feeding and tape cutting operations, click the "Quit cut test"
button to finish the cut test mode.
Finish the cut test mode.
The result of tape feeing and tape
cutting is displayed.
Fig. 18 "Cut Test" flow
16
Cut button