7 ] Reassembling The Top Cover Assy - Brother QL-1060N Service Manual

[ 7 ] Reassembling the Top Cover ASSY

(1) Assemble the platen ASSY, platen gear and platen shaft bearing into the hole of the top
cover as shown in the figure below.
(2) Put the other end of the platen ASSY into the notch of the hole at the left hand side of the
top cover.
Top cover
Platen ASSY
Fig. 3.2-34 Reassembling the Top Cover ASSY (1)
Platen ASSY
Fig. 3.2-35 Reassembling the Top Cover ASSY (2)
III- 48
Platen shaft bearing
Top cover
Platen ASSY
Platen gear