Brother QL-1110NWB User Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Label Maker
  5. QL-1110NWB
  6. User manual

Brother QL-1110NWB User Manual

Hide thumbs Also See for QL-1110NWB:
Table of Contents

Advertisement

Quick Links

User's Guide
QL-1110NWB
Read the Product Safety Guide first, then read the Quick Setup Guide for
the correct setup procedure. After reading this guide, keep it in a safe
place for quick reference.
Version 01
ENG

Advertisement

Table of Contents
loading

Related Manuals for Brother QL-1110NWB

Summary of Contents for Brother QL-1110NWB

  • Page 1 User’s Guide QL-1110NWB Read the Product Safety Guide first, then read the Quick Setup Guide for the correct setup procedure. After reading this guide, keep it in a safe Version 01 place for quick reference.
  • Page 2 The available supplies may vary depending on the country. Available Manuals Visit the Brother Solutions Center at support.brother.com and click Manuals on your model page to download the latest manuals. This guide provides safety information; read it before you use the Product Safety Guide Label Printer.

  • Page 3: Symbols Used In This Guide

    Symbols Used in This Guide The following symbols are used throughout this guide: Indicates a potentially hazardous situation which, if the product is handled without WARNING following the warnings and instructions, could result in death or serious injuries. Indicates a potentially hazardous situation which, if not avoided, may result in minor CAUTION or moderate injuries.

  • Page 4: General Precautions

    When applying CD/DVD labels, use the applicator included with the CD/DVD label rolls. Failure to do so could cause damage to the CD/DVD player.  Users shall take full responsibility for applying CD/DVD labels. Brother accepts no responsibility for any loss or damage of data caused by the inappropriate use of CD/DVD labels. ...

  • Page 5: Table Of Contents

    Table of Contents Section I Basic Operations Set Up the Label Printer Parts Description ............................2 Front ..............................2 Rear..............................3 Connect the Power Cord ...........................4 Load the DK Roll............................5 Turn Power On/Off.............................8 Print Using a Computer (P-touch Editor) Install Printer Drivers and Software on a Computer ..................9 Connect the Label Printer to a Computer ....................10 Connect Using a USB Cable ......................10 ®...
  • Page 6 Apply Setting Changes to Multiple Label Printers ................35 ® Device Settings for Windows .........................36 Settings Dialog Box ...........................36 Menu Bar ............................38 Basic Tab............................39 Advanced Tab ...........................39 Management Tab ..........................39 Apply Setting Changes to Multiple Label Printers ................40 ® P-touch Template Settings for Windows ....................41 P-touch Template Settings Dialog Box....................42 Printer Setting Tool for Mac ........................44...
  • Page 7 Section II Application How to Use P-touch Editor ® For Windows ............................77 Starting P-touch Editor ........................77 Printing with P-touch Editor .......................79 Transfer Data to the Label Printer .....................80 For Mac..............................81 Start P-touch Editor ...........................81 Operation modes ..........................82 Transfer Data to the Label Printer .....................82 ®...
  • Page 8 Section III Network Introduction Network Features ..........................125 Change Your Label Printer Network Settings Change Your Label Printer's Network Settings (IP Address, Subnet Mask, and Gateway) ..................126 ® Using the BRAdmin Light Utility (Windows only) ................126 Other Management Utilities ........................128 Use Web Based Management (Web Browser)................128 ®...
  • Page 9 Wireless Network Terms and Concepts ....................157 Security Terms ..........................157 List of Barcodes for the P-touch Template Function General Procedure for the P-touch Template Function .................161 List of Barcodes for Specifying Settings ....................162 Use the Brother Barcode Scanner (Optional: PA-BR-001) viii...
  • Page 10 Section I Basic Operations Set Up the Label Printer Print Using a Computer (P-touch Editor) Print Using a Mobile Device Change the Label Printer Settings Print Labels Using P-touch Template Other Functions...

  • Page 11: Set Up The Label Printer

    Set Up the Label Printer Parts Description Front 1 Status LED 8 Wi-Fi LED 2 Power Button 9 Bluetooth LED 3 Feed Button 10 Label Output Slot 4 Cutter Button 11 DK Roll Compartment Cover 5 Bluetooth Button 6 Wi-Fi Button 7 WPS Button...

  • Page 12: Rear

    Set Up the Label Printer Rear 1 USB Port 2 LAN Port 3 USB Host Port 4 AC Power Port...

  • Page 13: Connect The Power Cord

    Set Up the Label Printer Connect the Power Cord Connect the AC Power Cord to the Label Printer. Then, plug the AC Power Cord into a grounded AC power outlet. IMPORTANT Do not use your Label Printer in areas where the power source voltage is different from the Label Printer's specified voltage.

  • Page 14: Load The Dk Roll

    Set Up the Label Printer Load the DK Roll Make sure that the Label Printer is turned Off. Pull the release levers on both sides of the Label Printer to unlock the DK Roll Compartment Cover. • Hold the Label Printer by the front, and firmly lift the DK Roll Compartment Cover to open it. IMPORTANT Before using the Label Printer, remove the protective sheet (1) from the Label Output Slot.
  • Page 15 Set Up the Label Printer Place the DK Roll into the Roll Spool Guide (1). • Make sure that the Roll Spool Arm (2) is inserted firmly in the Roll Spool Guide. • Make sure the Stabilizer (3) slides into the notch of the Label Printer. Thread the DK Roll through the Label Printer.
  • Page 16 Set Up the Label Printer Close the DK Roll Compartment Cover. IMPORTANT • Do not leave any printed labels in the Label Printer. Doing so will cause the labels to jam. • When not in use, remove any DK Rolls from inside the Label Printer and close the DK Roll Compartment Cover to prevent dust and debris from accumulating in the Label Printer.

  • Page 17: Turn Power On/Off

    Set Up the Label Printer Turn Power On/Off On: Press the Power ( ) Button to turn the Label Printer On. The Status LED turns green. IMPORTANT Press the Feed ( ) Button to align the end of the DK Roll. Off: Press and hold the Power ( ) Button again to turn the Label Printer Off.

  • Page 18: Print Using A Computer (P-Touch Editor)

    Software for Mac: Printer Driver, P-touch Editor, P-touch Update Software, Printer Setting Tool, and Wireless Device Setup Wizard Visit our website (install.brother) and download the Software Installer for the latest software and manuals. ® Double-click the downloaded EXE file (for Windows ) or DMG file (for Mac), and follow the on-screen instructions to proceed with the installation.

  • Page 19: Connect The Label Printer To A Computer

    Print Using a Computer (P-touch Editor) Connect the Label Printer to a Computer Refer to these directions for the type or connection method:  USB Cable connection See Connect Using a USB Cable on page 10.  Wireless LAN connection ®...
  • Page 20 Print Using a Computer (P-touch Editor) IMPORTANT • If you are going to connect the Label Printer to your network, we recommend that you contact your system administrator before installation. You must confirm your Wi-Fi settings before you proceed with this installation.
  • Page 21 Print Using a Computer (P-touch Editor) Wireless Direct Wireless Direct allows you to connect the Label Printer to your computer directly without a Wi-Fi access point/router; the printer serves as a Wi-Fi access point. Follow the on-screen instructions to select connecting via USB and proceed with the installation. Set the Label Printer to Wireless Direct mode.
  • Page 22 Print Using a Computer (P-touch Editor) WPS (Wi-Fi Protected Setup™) If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly. First, confirm that your Wi-Fi access point/router has the WPS symbol. Place the Label Printer within the range of your Wi-Fi access point/router. The range may differ depending on your environment.

  • Page 23: Connect Using A Wired Lan

    Print Using a Computer (P-touch Editor) Connect Using a Wired LAN Note To use a static IP address to connect your Label Printer to a wired LAN connection, install the printer drivers and Printer Setting Tool, and then specify the wired LAN connection settings. For more information, see Install Printer Drivers and Software on a Computer on page 9.

  • Page 24: Connect The Label Printer To A Barcode Scanner Using Bluetooth (Windows ® Only)

    Print Using a Computer (P-touch Editor) Connect the Label Printer to a Barcode Scanner using ® Bluetooth (Windows only) You can connect the Label Printer to a Barcode Scanner using a Bluetooth interface. Note • Follow the recommendations of the manufacturer of your Bluetooth-equipped devices, such as Barcode Scanners, and install any necessary hardware and software.

  • Page 25: Print From A Computer

    To use the Label Printer effectively, a number of applications and functions are available. You must install the printer driver to use these applications. Visit our website (install.brother) and download the installer for the applications and printer driver. Application Windows...

  • Page 26: Create Labels From Your Computer

    Print Using a Computer (P-touch Editor) Create Labels from Your Computer There are various methods for printing with this Label Printer. The following describes the procedure for printing from a computer using P-touch Editor or P-touch Address Book. Start P-touch Editor or P-touch Address Book, and then open the document you want to print. Create a label design.

  • Page 27: Attach Labels

    Print Using a Computer (P-touch Editor) Attach Labels Peel the backing from the label. Position the label, and then press firmly from top to bottom with your finger to attach the label. Note Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.

  • Page 28: Print Using A Mobile Device

    Install Applications for Use with Mobile Devices Brother offers various apps that allow you to print directly from your iPhone, iPad, and iPod touch or Android™ smartphone or tablet. We also offer apps that allow you to transfer data, such as templates, symbols, and databases created using a computer, wirelessly to your Label Printer.

  • Page 29: Connect Using Bluetooth

    Print Using a Mobile Device In your mobile device's Wi-Fi settings screen, select your wireless network's SSID, and then SSID of the Label Printer and enter the password. Note • The factory default SSID and password are as follows: SSID: "DIRECT-*****_QL-1110NWB" where ***** is the last five digits of the product serial number. The password: 111***** where ***** is the last five digits of the product serial number.

  • Page 30: Print Labels From A Mobile Device

    Print Using a Mobile Device Print Labels from a Mobile Device Start the mobile printing application on your mobile device. Note Make sure that the Label Printer is connected to your mobile device via a wireless connection. See Connect the Label Printer to a Mobile Device on page 19. Select a label template or design.

  • Page 31: Attach Labels

    Print Using a Mobile Device Attach Labels Peel the backing from the label. Position the label, and then press firmly from top to bottom with your finger to attach the label. Note Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.

  • Page 32: Change The Label Printer Settings

    The Printer Setting Tool is installed automatically when you use the initial installer to install the printer driver. For more information, see Install Printer Drivers and Software on a Computer on page 9. IMPORTANT The Printer Setting Tool is available only with compatible Brother printers. Before Using the Printer Setting Tool ...

  • Page 33: Use The Printer Setting Tool For Windows

    ® ®  For Windows 7 / Windows Server 2008 / Windows Server 2008 R2: Click Start > All Programs > Brother > Labels & Mobile Printer > Printer Setting Tool. ® ® ® ®  For Windows 8 / Windows 8.1 / Windows Server...
  • Page 34 Change the Label Printer Settings Check that the Label Printer you want to configure appears next to Printer. If a different Label Printer appears, select the Label Printer you want from the drop-down list. Select the settings you want to change, and then specify or change the settings in the dialog box. ®...

  • Page 35: Communication Settings For Windows

    Change the Label Printer Settings ® Communication Settings for Windows Use Communication Settings in the Printer Setting Tool to specify or change the Label Printer communication information, when connecting the Label Printer and computer with a USB Cable or via a Bluetooth connection.
  • Page 36 Change the Label Printer Settings 5 Node Name Displays the node name (nodes can be renamed). For more information, see Menu Bar on page 28. 6 Settings Tabs Contains settings that may be specified or changed. appears in the tab, the settings in that tab will not be applied to the Label Printer. 7 Settings Display/Change Area Displays the current settings for the selected item.

  • Page 37: Menu Bar

    Change the Label Printer Settings Menu Bar • Apply Settings to the Printer Applies the settings to the Label Printer. • Save Settings in Command File Saves the specified settings in a command file. The file extension is .bin. The saved command file can be used with the mass storage mode to apply the settings to a Label Printer. For more information, see Mass Storage Mode on page 70.
  • Page 38 Change the Label Printer Settings Note • All settings, such as wireless settings or TCP/IP settings, can be imported, except for node names. • Only profiles that are compatible with the selected Label Printer can be imported. • If the imported profile’s IP address is set to STATIC, change the IP address of the imported profile, if needed, so that it does not duplicate the IP address of an existing configured Label Printer on the network.

  • Page 39: General Tab

    Change the Label Printer Settings General Tab Communication Settings • Network Settings on Power On Specifies the conditions for connecting via Wi-Fi when the Label Printer is turned on. Select Wireless LAN by Default, Wired LAN by Default or Keep Current State. •...

  • Page 40: Wired Lan / Wireless Lan Tabs

    Change the Label Printer Settings Wired LAN / Wireless LAN Tabs TCP/IP (Wired/Wireless) • Boot Method Selects AUTO, BOOTP, DHCP, RARP, or STATIC. • IP Address/Subnet Mask/Gateway Specifies the various networking values. You can enter these settings only when the IP address is set to STATIC. •...
  • Page 41 Change the Label Printer Settings You can specify settings only when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client certificate must be registered. To register a certificate, connect to the Label Printer from a web browser, and then specify the certificate.

  • Page 42: Wireless Direct Tab

    Change the Label Printer Settings Wireless Direct Tab Wireless Direct Settings • SSID/Network Key Generation Select AUTO or STATIC. • SSID (Network Name)/Network Key Specifies the SSID (25 ASCII characters or fewer) and the network key (63 characters or fewer) you want to use in the Wireless Direct mode.

  • Page 43: Bluetooth Tab

    Change the Label Printer Settings Bluetooth Tab Bluetooth Settings • Visible to Other Devices Allows the Label Printer to be “discovered” by other Bluetooth devices. • Change PIN code If this check box is selected, you can change the PIN. •...

  • Page 44: Apply Setting Changes To Multiple Label Printers

    Change the Label Printer Settings Apply Setting Changes to Multiple Label Printers After applying settings to the first Label Printer, disconnect the Label Printer from the computer, and then connect the second Label Printer to the computer. Select the newly connected Label Printer from the Printer drop-down list. Note If the Automatically detects the connected printer, and retrieves the current settings check box in the Option Setting dialog box is selected, the Label Printer connected with the USB cable is automatically...

  • Page 45: Device Settings For Windows

    Change the Label Printer Settings ® Device Settings for Windows Use Device Settings in the Printer Setting Tool to specify or change printer settings when connecting the Label Printer and computer with a USB Cable or via a Bluetooth connection. Not only can you change the device settings for one Label Printer, but you can also apply the same settings to multiple Label Printers.
  • Page 46 Change the Label Printer Settings 3 Settings Tabs Contains settings that may be specified or changed. Note appears on a tab, the settings in that tab cannot be changed. In addition, the settings in the tab will not be applied to the Label Printer even if you click Apply. The settings in the tab will not be saved or exported when you use the Save in Command File or Export commands.

  • Page 47: Menu Bar

    Change the Label Printer Settings Menu Bar File Menu Options • Apply Settings to the Printer Applies the settings to the Label Printer. • Check Setting Displays the current settings. • Save Settings in Command File Saves the specified settings in a command file. •...

  • Page 48: Basic Tab

    Change the Label Printer Settings Basic Tab • Auto Power On Specifies whether the Label Printer turns on automatically when the AC Power Cord is plugged into an AC power outlet. • Auto Power Off Specifies the period of time that passes before the Label Printer turns off automatically when connected to an AC power outlet.

  • Page 49: Apply Setting Changes To Multiple Label Printers

    Change the Label Printer Settings Apply Setting Changes to Multiple Label Printers After applying the settings to the first Label Printer, disconnect it from your computer, and then connect the second Label Printer. Select the newly connected Label Printer from the Printer drop-down list. Click Apply.

  • Page 50: P-Touch Template Settings For Windows

    • P-touch Template mode is also compatible with other input devices like a scale, testing machine, controller, or a programmable logic device. • For more information on P-touch Template Settings, download the P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com/manuals.

  • Page 51: P-Touch Template Settings Dialog Box

    Change the Label Printer Settings P-touch Template Settings Dialog Box 1 Default Command Mode Specifies the P-touch Template mode as the default mode. To change the mode, see the Management Tab on page 39. 2 Default Template Number Specifies a default template number that the Label Printer sets when it is turned on. If you do not want to transfer a template to the Label Printer, do not specify a template number.
  • Page 52 23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh To change the characters, download the P-touch Template Manual/Command Reference (English only) from your model's Manuals page on the Brother Solutions Center at support.brother.com/manuals. 7 Command Prefix Character Specifies the prefix character code that identifies commands used in P-touch Template mode.

  • Page 53: Printer Setting Tool For Mac

    Use the Printer Setting Tool for Mac Connect the Label Printer you want to configure to the computer. Click Macintosh HD > Applications > Brother > Printer Setting Tool > Printer Setting Tool.app. The Printer Setting Tool window appears. Check that the Label Printer you want to configure appears next to Printer. If a different Label Printer appears, select the Label Printer you want from the pop-up list.

  • Page 54: Settings Dialog Box

    Change the Label Printer Settings Settings Dialog Box 1 Printer Lists the connected Label Printers. 2 Import Imports settings from a file. 3 Export Saves the current settings in a file. 4 Settings Tabs Contain settings that you can specify or change. 5 Apply Settings to the Printer Applies the settings to the Label Printer.

  • Page 55: Basic Tab

    Change the Label Printer Settings Basic Tab • Auto Power On Specifies whether the Label Printer turns on automatically when the AC Power Cord is plugged into an AC power outlet. • Auto Power Off Specifies the period of time that passes before the Label Printer turns off automatically when connected to an AC power outlet.

  • Page 56: Bluetooth Settings Tab

    Change the Label Printer Settings Bluetooth Settings Tab • Bluetooth Device Name Displays the Bluetooth device name. • Bluetooth Address Displays the acquired Bluetooth address. • Visible to Other Devices Allows the Label Printer to be "discovered" by other Bluetooth devices. •...

  • Page 57: Apply Setting Changes To Multiple Label Printers

    Change the Label Printer Settings Apply Setting Changes to Multiple Label Printers After applying settings to the first Label Printer, disconnect the Label Printer from the computer, and then connect the second Label Printer to the computer. Select the newly connected Label Printer from the Printer drop-down list. Click Apply Settings to the Printer.

  • Page 58: Change Settings When Printing From A Mobile Device

    Change the Label Printer Settings Change Settings When Printing from a Mobile Device When using a mobile device, change any necessary settings using the application before printing. The settings that can be changed vary by application. Note Before connecting a mobile device, you can specify detailed settings by connecting the Label Printer to a computer and using the Printer Setting Tool.

  • Page 59: Print Labels Using P-Touch Template

    • P-touch Template mode is also compatible with other input devices like a scale, testing machine, controller, or a programmable logic device. • See the P-touch Template Manual/Command Reference for more information. You can download the latest versions from the Brother Solutions Center at support.brother.com/manuals.

  • Page 60: Preparation

    ® ®  For Windows 7 / Windows Server 2008 / Windows Server 2008 R2: Click Start > All Programs > Brother > Label & Mobile Printer > Printer Setting Tool. ® ® ® ®  For Windows 8 / Windows 8.1 / Windows Server...
  • Page 61 Print Labels Using P-touch Template Note • By default, printing begins when the code "^FF" is scanned from a barcode using a Barcode Scanner. (This can be changed with the settings highlighted by (A) in the previous image.) If Received Data Size is selected with the number of bytes setting, the template will automatically print after the specified number of bytes have been scanned.

  • Page 62: Connect A Barcode Scanner

    Print Labels Using P-touch Template Connect a Barcode Scanner We recommend using a reliable high-quality Barcode Scanner and checking the Barcode Scanner specifications before selecting a model.  Barcode Scanner connection methods: Use the USB Host interface, the Wi-Fi interface, or the Bluetooth interface. ...

  • Page 63: Standard Template Printing

    Label Printer but you will need to scan different barcodes in step f to select and print it. For more information, download the P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com/manuals. • You can add a custom folder under Configurations, and drag-and-drop a transferred template into that custom folder to manage different sets of templates.
  • Page 64 For more information on P-touch Template Settings, download P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com/manuals. • To specify the number of copies you want, scan the Number of copies barcode, and then scan the barcodes under For entering numbers to specify a three-digit number.

  • Page 65: Advanced Template Printing

    Print Labels Using P-touch Template Advanced Template Printing Download a template and scan a barcode to print a copy or insert the scanned data into a different template. Note • For more information on the barcodes that can be scanned using various settings, see List of Barcodes for the P-touch Template Function on page 161.
  • Page 66 For more information on P-touch Template Setting Tool, download P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com/manuals. • To specify the number of copies you want, scan the Number of copies barcode, and then scan the barcodes under For entering numbers to specify a three-digit number.
  • Page 67 Print Labels Using P-touch Template Scan a barcode that contains the data you want inserted into the barcode object in the selected downloaded template from step f. Example: (CODE128/9-digit) Scan the Begin printing barcode to send the command to start printing. The barcode in the printed template will contain the data from the barcode scanned in step g.

  • Page 68: Database Lookup Printing

    Print Labels Using P-touch Template Database Lookup Printing You can download a database linked to a template, scan a barcode as a keyword to find a record containing that keyword, and then insert that record into the template to print. Note •...
  • Page 69 For more information on P-touch Template Setting Tool, download P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com/manuals. • To specify the number of copies you want to print, scan the Number of copies barcode, and then scan the barcodes under For entering numbers to specify a three-digit number.
  • Page 70 Print Labels Using P-touch Template Note You can use P-touch Editor to create and print a label with a single barcode for step f. Example: Scan a barcode that contains the keyword to look up in the downloaded database from step d. Example: Scan the Delimiter barcode to send the command to start searching the downloaded database for the scanned keyword.

  • Page 71: Numbered (Serialized Number) Printing

    Print Labels Using P-touch Template Numbered (Serialized Number) Printing You can automatically increase text numbers or barcodes up to 999 when printing downloaded templates. Select text and/or barcode objects to increment while printing. Text Numbering (Serializing) Use P-touch Editor to create or open a template and select a text object that you want to automatically increment while printing.

  • Page 72: Barcode Numbering (Serializing)

    Print Labels Using P-touch Template Barcode Numbering (Serializing) Use P-touch Editor to create or open a template and select a barcode object that you want to automatically increment while printing. Right-click the barcode object, and select Properties. The Bar Code Properties window appears. Highlight or drag the cursor over a group of numbers and letters within the barcode object that you want to increment (maximum of 15).

  • Page 73: Print With Numbering (Serializing) Advanced Operation

    Print Labels Using P-touch Template Print with Numbering (Serializing) Advanced Operation Using P-touch Transfer Manager, transfer (from P-touch Editor) a template (label layout) to the Label Printer. For more information, see How to Use P-touch Transfer Manager and P-touch Library ®...

  • Page 74: Other Functions

    Other Functions Confirm Label Printer Settings You can print a Settings Report without connecting the Label Printer to a computer or mobile device. Turn on the Label Printer. Load 2.4" (62 mm) or wider DK Roll into the Label Printer. Press and hold the Cutter ( ) Button for two seconds.

  • Page 75: Barcodes Compatible With Crop Print

    Other Functions Barcodes Compatible with Crop Print • Code 39/ Code 3 of 9 • ITF/ ITF-14/ Interleaved 2 of 5 • GS1-128 (UCC/ EAN-128) • Codabar (Code 2 of 7, NW-7) • UPC-A • UPC-E • JAN-8/ EAN-8 • JAN-13/ EAN-13 Barcode Specification Property Specification...

  • Page 76: Print Barcode Labels Using Crop Print

    Other Functions Barcode Layout Correct Barcode Layout Incorrect Barcode Layout Barcodes start in top left corner and run down the column, Not identified continuing at the top of the next column to the right. (not aligned along the top margin) D00XXU001 D00VXY004 D00ZXX003...
  • Page 77 Other Functions Click the Basic tab, and do one of the following: For Die Cut labels, clear the Cut Every check box.   For Continuous Rolls, select the Cut Every check box. Click the Crop Print tab, and select the Automatically print individual labels with barcodes check box.
  • Page 78 Other Functions IMPORTANT • Do not enlarge or reduce the size of the barcode sheet. The barcodes may not be identified correctly. • When printing from Acrobat Reader, do the following: - In the Page Sizing & Handling section, deselect the Choose paper source by PDF page size radio button.

  • Page 79: Mass Storage Mode

    Other Functions Mass Storage Mode Description The mass storage feature allows you to send a file to the Label Printer using the USB interface, without installing a printer driver. This feature is useful for: Applying printer settings saved in a command file (.bin file format) or adding templates (.blf file format) into ...

  • Page 80: Use The Mass Storage Mode

    Other Functions Use the Mass Storage Mode Confirm that the Label Printer is turned off. Press and hold the Wi-Fi ( ) Button and the Power ( ) Button at the same time for several seconds. The Label Printer starts up in mass storage mode, the Status LED lights in green. Connect the computer or device to the Label Printer via USB.

  • Page 81: Jpeg Printing

    Other Functions JPEG Printing Image data (JPEG) can be printed without using the printer driver. Note • JPEG images can be printed using the mass storage feature. • The Object Push Profile (OPP) is used for printing via a Bluetooth connection. •...

  • Page 82: Distributed Printing (Windows ® Only)

    Other Functions ® Distributed Printing (Windows only) When printing a large number of labels, printing can be distributed among multiple Label Printers, via USB or network connection, to reduce printing time. Note The number of pages is divided among the selected Label Printers. If the specified number of pages cannot be evenly divided among the Label Printers, it will be divided in the order of the Label Printers as shown.
  • Page 83 Other Functions In the Distributed Printing Settings dialog box, select the Label Printers you want to use for distributed printing. 1 Click Detect Current Paper Information…. The current Label Printer information detected appears below Current Paper and Paper Type. 2 Select the check box next to the Printer Name you want. Note •...
  • Page 84 Other Functions Specify the label size. If only one Label Printer has been selected.  In the Distributed Printing Settings dialog box from step d, select the Label Printer whose settings you want to specify, and then either double-click or right-click, and then click Settings. From the Set Width drop-down list, select the label size.
  • Page 85 Section II Application How to Use P-touch Editor ® How to Use the P-touch Address Book (Windows only) ® How to Use P-touch Editor Lite LAN (Windows only) How to Use P-touch Transfer Manager and P-touch Library ® (Windows only) How to Transfer Templates with P-touch Transfer Express ®...

  • Page 86: How To Use P-Touch Editor

     For Windows 7 / Windows Server 2008 / Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Editor 5.2, or double-click the P-touch Editor 5.2 shortcut icon on the desktop. ® ® ® ®...
  • Page 87 How to Use P-touch Editor Select one of the displayed options: 1 To create a new layout, double-click New Layout, or click New Layout and then click → . 2 To create a new layout using a preset layout, double-click a category button, or select a category button and then click →.

  • Page 88: Printing With P-Touch Editor

    How to Use P-touch Editor Printing with P-touch Editor  Express mode This mode allows you to quickly create layouts that include text and images. Configure the Printing Settings in the Print screen before printing. To print, click File > Print from the menu bar or click the Print icon. ...

  • Page 89: Transfer Data To The Label Printer

    How to Use P-touch Editor Snap mode  This mode allows you to capture all or a portion of your computer screen display, print it as an image, and save it for future use. Click the Snap mode selection button. The Description of Snap mode dialog box appears.

  • Page 90: For Mac

    How to Use P-touch Editor For Mac Start P-touch Editor Double-click Macintosh HD > Applications, and then double-click the P-touch Editor application icon. Note When using a Mac, you cannot transfer label data created using P-touch Editor to the Label Printer. When P-touch Editor starts, select whether you want to create a new layout or open an existing layout.

  • Page 91: Operation Modes

    How to Use P-touch Editor Operation modes  Standard mode This mode allows you to create labels with text and images. The Standard mode consists of the following sections: 1 Toolbar 2 Label Inspector 3 Database Connection Area 4 Object Inspector 5 Layout Window Transfer Data to the Label Printer ®...

  • Page 92: How To Use The P-Touch Address Book (Windows ® Only)

    For Windows  7 / Windows Server 2008 / Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Address Book 1.3, or double-click the P-touch Address Book 1.3 shortcut icon on the desktop. ® ® ®...
  • Page 93 ® How to Use the P-touch Address Book (Windows only) In the Startup dialog box, specify the P-touch Address Book operation you want to perform and click the OK button. When Create a New Contact is selected, the Layout Window appears. ...
  • Page 94 ® How to Use the P-touch Address Book (Windows only) Layout Window  The Layout Window consists of the following sections: 1 Menu Bar Commands are categorized under each menu (File, Edit, View, Layout and Tools) according to their functions. 2 Standard Toolbar Provides a group of frequently used commands (such as New Contact, Edit Contact, Find or Print).

  • Page 95: Create A New Contact

    ® How to Use the P-touch Address Book (Windows only) Create a New Contact This section explains how to create a new contact. Click File > New Contact, or click the New Contact button. The New Contact dialog box appears. Enter the new contact information.
  • Page 96 ® How to Use the P-touch Address Book (Windows only) 1 New Contact Form Toolbar The following commands are categorized in the menu: Icon Button Name Function Previous Displays the previous contact. Next Displays the next contact. New Contact Displays the form window for a new contact. Delete Contact Deletes the contact that is currently selected.

  • Page 97: How To Use P-Touch Editor Lite Lan (Windows ® Only)

    P-touch Editor Lite LAN is supported only when the machine is connected to a Network. By downloading the installer from install.brother and installing it, the P-touch Editor Lite LAN program package is created on the desktop. Open the program package and copy it to a shared folder on the server.

  • Page 98: Layout Window

    ® How to Use P-touch Editor Lite LAN (Windows only) Layout window 1 Command Toolbar 2 Properties Toolbar 3 Label View 1 Command Toolbar Icon Function Displays the new label creation screen. Opens a saved file with P-touch Editor Lite LAN. Saves the data to your computer, but not to the Label Printer.
  • Page 99 ® How to Use P-touch Editor Lite LAN (Windows only) 2 Properties Toolbar Icon Function Click to change the font. Click to specify the font size. You can adjust the font size up or down one level by clicking Specifies the font style: Bold Italic Underline...
  • Page 100 ® How to Use P-touch Editor Lite LAN (Windows only) 3 Label View Display Function This label view is displayed when the software is started. The width of label currently set is displayed on the left of label image. When "Auto" is shown on the right, the length of label is automatically adjusted to the length of text.
  • Page 101 Select either Display New Value after Printing or Reset to Original Value after Printing to set the numbering option. Brother Solutions Center Click Brother Solutions Center to go to the website for assistance and information. About Click About to learn about the P-touch Editor Lite LAN version.

  • Page 102: How To Use P-Touch Transfer Manager And P-Touch Library (Windows ® Only)

    ® ® • For Windows 7 / Windows Server 2008 / Windows Server 2008 R2: Click Start > All Programs > Brother P-touch > P-touch Tools > P-touch Transfer Manager 2.3. ® ® ® ® • For Windows 8 / Windows 8.1 / Windows Server...
  • Page 103 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Main window 1 Menu Bar Provides access to various commands, which are grouped under each menu title (File, Edit, View, Tool, and Help) according to their functions. 2 Toolbar Provides access to frequently used commands.
  • Page 104 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Explanations of the Toolbar Icons Icon Button name Function Transfers templates and other data from the computer to the Label Transfer Printer. Save Transfer File Changes the file type of the data to be transferred to other applications.

  • Page 105: Transfer Templates Or Other Data From The Computer To The Label Printer

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Transfer Templates or Other Data from the Computer to the Label Printer Use the following procedure to transfer templates, databases, and images from the computer to the Label Printer.
  • Page 106 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Right-click the Configurations folder, select New, and then create a new folder. Drag the template or other data that you want to transfer and place it in the new folder. Transfer Function Specification Maximum number of Data type...
  • Page 107 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Note You can confirm the available space in the transfer file memory by printing the Printer Setting Report. For more information, see Confirm Label Printer Settings on page 65. See RomFree in the report for the available space The available space that appears in "RomFree = ******* byte"...
  • Page 108 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) To change the key number assigned to an item, right-click the item, select Key Assign, and then select the key number you want. Note • Except for the data in databases, all data transferred to the Label Printer is assigned a key number. •...
  • Page 109 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Select the folder containing the templates or other data that you want to transfer, and then click Transfer. A confirmation message appears. Note • You can also transfer individual items to the Label Printer without adding them to a folder. Select the template or other data that you want to transfer, and then click Transfer.

  • Page 110: Back Up Templates Or Other Data Saved In The Label Printer

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Back up Templates or Other Data Saved in the Label Printer Use the following procedure to retrieve templates or other data saved in the Label Printer and save it on the computer.

  • Page 111: Delete Label Printer Data

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Delete Label Printer Data Use the following procedure to delete all templates or other data saved on the Label Printer. Connect the computer and the Label Printer and turn on the Label Printer. The Label Printer model name appears next to a printer icon in the folder view.

  • Page 112: Create Transfer Files And Transfer Package Files

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Create Transfer Files and Transfer Package Files You can use P-touch Transfer Manager to save template data created using P-touch Editor in .blf or .pdz format. You can transfer these files in this format to a Label Printer over a network, from a computer or mobile device.

  • Page 113: P-Touch Library

    ® ® For Windows 7 / Windows Server 2008 / Windows Server 2008 R2:  Click Start > All Programs > Brother P-touch > P-touch Tools > P-touch Library 2.3. ® ® ® ®  For Windows 8 / Windows 8.1 / Windows Server...
  • Page 114 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) 4 Templates List Displays a list of the templates in the selected folder. 5 Preview Displays a preview of the templates selected in the templates list. Explanations of the Toolbar Icons Icon Button name Function...

  • Page 115: Open And Edit Templates

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Open and Edit Templates Select the template you want to open or edit, and then click Open. The program associated with the template launches, allowing you to edit the template.

  • Page 116: Print Templates

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Print Templates Select the template you want to print, and then click Print. The connected Label Printer prints the template.

  • Page 117: Search For Templates

    ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Search for Templates You can search for templates registered to P-touch Library. Click Search. The Search dialog box appears. Specify the search criteria. The following search criteria are available: Settings Details Multiple Parameters...
  • Page 118 ® How to Use P-touch Transfer Manager and P-touch Library (Windows only) Close the Search dialog box. To confirm the search results, click Search Results in the folder view. Note You can register templates to P-touch Library by dragging and dropping them into the All Contents folder or to the folder list.

  • Page 119: How To Transfer Templates With P-Touch Transfer Express (Windows ® Only)

    P-touch Transfer Express. You can then use P-touch Transfer Express to transfer the template directly to your Label Printer. To download the latest version of P-touch Transfer Express, visit support.brother.com and go to your model's Downloads page.

  • Page 120: Transfer The Template To P-Touch Transfer Manager

    10 / Windows Server 2016: The template can also be transferred to P-touch Transfer Manager by clicking Start > Brother P-touch > P-touch Transfer Manager 2.3 to start P-touch Transfer Manager, and then dragging the .lbx file to the P-touch Transfer Manager window.

  • Page 121: Save The Template As A Transfer Package File (.Pdz)

    ® How to Transfer Templates with P-touch Transfer Express (Windows only) Save the Template as a Transfer Package File (.pdz) To create a file in a format that can be used by P-touch Transfer Express, save the template as a Transfer Package file (.pdz).
  • Page 122 ® How to Transfer Templates with P-touch Transfer Express (Windows only) Click File > Save Transfer File. IMPORTANT The Save Transfer File option appears only if the Label Printer is disconnected from the computer or offline. Note • If you click Save Transfer File after selecting Configurations or a created folder, all templates in the folder are saved as the Transfer Package file (.pdz).

  • Page 123: Distribute The Transfer Package File (.Pdz) And P-Touch Transfer Express To Others

    ® How to Transfer Templates with P-touch Transfer Express (Windows only) Distribute the Transfer Package File (.pdz) and P-touch Transfer Express to Others Note If you already have P-touch Transfer Express downloaded, it is not necessary for the administrator to send the Transfer Express folder.

  • Page 124: Transfer The Transfer Package File (.Pdz) To Your Label Printer

    ® How to Transfer Templates with P-touch Transfer Express (Windows only) Transfer the Transfer Package File (.pdz) to Your Label Printer Using the P-touch Transfer Express application received from the administrator, you can transfer the Transfer Package file (.pdz) to the Label Printer. IMPORTANT Do not turn off the power when transferring templates.
  • Page 125 ® How to Transfer Templates with P-touch Transfer Express (Windows only) Transferring multiple Transfer Package files (.pdz)  1 When there are multiple Transfer Package files (.pdz) within the folder containing PtTrExp.exe, click Browse. 2 Select the Transfer Package file you want to transfer, and then click Open. 3 Click Transfer.
  • Page 126 ® How to Transfer Templates with P-touch Transfer Express (Windows only) 4 Click Yes. 5 The transfer of the Transfer Package file begins. When the transfer is complete, click OK.

  • Page 127: How To Update P-Touch Software

    Click P-touch Update Software on the Apps screen or double-click P-touch Update Software on the desktop. ® ®  For Windows 10 / Windows Server 2016: Click Start > Brother P-touch > P-touch Update Software, or double-click P-touch Update Software on the desktop.
  • Page 128 How to Update P-touch Software Click the Computer software update icon. Select the Printer and Language, select the check boxes next to P-touch Editor and P-touch Address Book, and then click Install. A message appears indicating that the installation has finished.

  • Page 129: Update The Firmware

    Click P-touch Update Software on the Apps screen or double-click P-touch Update Software on the desktop. ® ®  For Windows 10 / Windows Server 2016: Click Start > Brother P-touch > P-touch Update Software, or double-click P-touch Update Software on the desktop.
  • Page 130 How to Update P-touch Software Click the Machine update icon. Select the Printer, make sure that The machine is connected correctly. message appears, and then click OK.

  • Page 131: For Mac

    How to Update P-touch Software Select the Language, select the check box next to the firmware you want to update to, and then click Transfer. IMPORTANT Do not turn off the Label Printer or disconnect the cable during data transfer. Check the content to be updated, and then click Start to begin the update.
  • Page 132 How to Update P-touch Software Click the Machine update icon. Select the Printer, make sure that The machine is connected correctly. message appears, and then click OK. Select the Language, select the check box next to the firmware you want to update to, and then click Transfer.
  • Page 133 Section III Network Introduction Change Your Label Printer Network Settings Web Based Management...

  • Page 134: Introduction

    Introduction Network Features Your Label Printer can be shared on an IEEE 802.11b/g/n wireless network or Ethernet 10BASE-T/100BASE- TX Auto Negotiation wired network using the internal network print server. The print server supports various functions and methods of connection on a network supporting TCP/IP, depending on the operating system you are running.

  • Page 135: Change Your Label Printer Network Settings

    Using the BRAdmin Light Utility (Windows only) The BRAdmin Light utility is designed for the initial setup of Brother network connectable devices. It can also search for Brother products in a TCP/IP environment, display the status, and configure basic network settings, such as the IP address.
  • Page 136 Light utility screen. Select STATIC for Boot Method. Type the IP Address, Subnet Mask, and Gateway settings (if needed) for your print server. Click OK. Once you setup the IP address, the Brother print server appears in the device list.

  • Page 137: Other Management Utilities

    BRAdmin Professional is a utility for more advanced management of network connected Brother devices. This utility can search for Brother products on your network, and display the device status from a simple Explorer style window that changes color to represent the status of each device. You can configure network ®...

  • Page 138: Web Based Management

    Web Based Management Overview You can use a standard web browser to manage your Label Printer on the network using HTTP. When using Web Based Management, the following operations are available:  Displaying your Label Printer status information  Changing network settings, such as TCP/IP information ...

  • Page 139: Configure The Printer Settings Using Web Based Management (Web Browser)

    Web Based Management Configure the Printer Settings Using Web Based Management (Web Browser) A standard web browser can be used to change your print server settings using the HTTP (Hyper Text Transfer Protocol). In your browser's address bar, type the IP address of your Label Printer (or print server name). For example: http://192.168.1.2 Note If you have edited the hosts file on your computer or are using a Domain Name System, you can also type...
  • Page 140 Section IV Appendix Reset the Label Printer Maintenance Troubleshooting Product Specifications Software Development Kit Notes on Using P-touch Transfer Manager Network Terms and Information List of Barcodes for the P-touch Template Function Use the Brother Barcode Scanner (Optional: PA-BR-001)

  • Page 141: Reset The Label Printer

    Reset the Label Printer Reset the internal memory of your Label Printer to clear all the saved label files, or if the Label Printer is not operating correctly. Reset All Settings to the Factory Settings Using the Label Printer Buttons To reset the Label Printer, do the following: Turn off the Label Printer.

  • Page 142: Maintenance

    Maintenance We recommend cleaning your Label Printer on a regular basis to maintain its correct performance. Note Always disconnect the AC Power Cord before cleaning the Label Printer. Clean the Exterior of the Unit Wipe any dust and marks from the main unit using a soft, dry cloth. Use a cloth slightly damp with water on difficult to remove marks.

  • Page 143: Clean The Roller

    Maintenance Clean the Roller Cut the DK label and peel the backing from the label. Then, place the adhesive side of the label against the roller and remove the dirt. Self-Cleaning Print Head The DK Roll (thermal recording paper type) used with the machine is designed to clean the print head automatically.

  • Page 144: Troubleshooting

    Insert a DK Roll correctly. For more information, see Load the DK Roll on page 5. If you still have problems, read the troubleshooting tips in this chapter for help. If, after reading this chapter, you are unable to resolve your problem, visit the Brother Solutions Center at support.brother.com.

  • Page 145: Led Indications

    Troubleshooting LED Indications The indicators light and flash to indicate the Label Printer's status. Indicator is lit in the color shown Indicator is flashing in the color shown Indicator can be off, lit, or flashing in any color Indicator is off Bluetooth Status LED Wi-Fi LED...
  • Page 146 If the orange light flashes at 0.5 second intervals, the Label Printer is in Cooling mode. Searching for Label Printers Data overwrite mode Label Printer is in Boot mode. Contact Brother Customer Service. Roll end error No media error Wrong media error Feed error...

  • Page 147: Printing Problems

    • Has a print error or transmission error occurred? Turn the Label Printer Off and then turn it On again. If there is still a problem, contact your Brother Customer Service. • If the Label Printer is connected via a USB hub, try connecting it directly to the computer.
  • Page 148 ) Button. 3 If the error is not reset, turn off the Label Printer, and then turn it on again. 4 If the error is not reset, contact Brother Customer Service. I want to reset the Label Printer. You can reset the Label Printer using the Printer Setting Tool from a computer.
  • Page 149 Troubleshooting Problem Solution When printing via the USB Cable, the • Is the Label Printer set for sequential printing? Label Printer repeatedly pauses and If so, set print mode to buffered printing. then continues printing. ® ® ® For Windows 7 / Windows Server 2008 / Windows Server 2008 R2:...
  • Page 150 Troubleshooting Problem Solution Printed barcodes cannot be read.  Print labels so that barcodes are aligned with the print head as shown below: 1 Print head 2 Barcodes 3 Printing orientation  Barcodes may not be read if they are reduced or enlarged. ...
  • Page 151 Troubleshooting Problem Solution Barcodes printed using applications If the barcode data was created using a landscape orientation, change the other than P-touch Editor cannot be Orientation setting in the Basic tab of the printer driver to Landscape and try read. again.

  • Page 152: Network Setup Problems

    Troubleshooting Network Setup Problems Problem Solution You are using security software Confirm your settings in the installation dialog box.   Allow access when the security software alert message appears during the Label Printer installation. Your security settings Recheck and select the correct security settings. (SSID/Network Key) are incorrect ...
  • Page 153 Troubleshooting Problem Solution Your Label Printer is not connected  Check that the Label Printer is in the mode you want to connect to. correctly to the network  If the Label Printer is still not connected, please try the following: •...

  • Page 154: Label Printer Cannot Print Over The Network Label Printer Is Not Found On The Network Even After Successful Installation

    Incorrect port numbers are being The following port numbers are used for Brother network features: used for the Brother network features BRAdmin Light i Port number 161 / Protocol UDP ...

  • Page 155: Checking The Operation Of Network Devices

    Troubleshooting Checking the Operation of Network Devices Problem Solution Your Label Printer and wireless Make sure you have performed all of the tasks on page 135. access point/router are not turned on I do not know my Label Printer Check the Printer Setting Tool. For more information, see Change the Label network settings, such as the IP Printer Settings on page 23.

  • Page 156: Product Specifications

    (width) There is a chance that you may not be able to print in full width depending on your environment. For the details, see our website, support.brother.com. Note: We recommend designing with enough margin, because there is a possibility of cut off if the paper is not fed in straight.
  • Page 157 50°F to 95°F (10°C to 35°C) / 20% to 80% (Maximum wet- temperature/humidity bulb temperature 80.6°F (27°C)) Storage -4°F to 140°F (-20°C to 60°C) / 5% to 95% (Maximum wet- temperature/humidity bulb temperature 113°F (45°C)) Compatible operating systems See support.brother.com for a complete and updated list of software.

  • Page 158: Software Development Kit

    Software Development Kit A Software Development Kit (SDK) is available. Visit the Brother Developer Center (www.brother-usa.com/lp/civ/home.aspx). The b-PAC SDK and the SDKs for mobile devices (Android, iPhone, and iPad) can also be downloaded. (The SDKs available are subject to change without notice.)

  • Page 159: Notes On Using P-Touch Transfer Manager

    Notes on Using P-touch Transfer Manager Because some P-touch Editor functions are not available with the Label Printer, keep the following points in mind when using P-touch Editor to create templates. You can check a preview of the printed template before the created template is transferred to the Label Printer.

  • Page 160: Notes On Transferring Data Other Than Templates

    Notes on Using P-touch Transfer Manager Notes on Transferring Data Other Than Templates  If the number or order of fields in a database is changed and only the database (.csv file) is transferred to update it, the database may not link correctly with the template. In addition, the first line of data in the transferred file must be recognized by the Label Printer as "field names".

  • Page 161: Network Terms And Information

    Network Terms and Information Supported Protocols and Security Features Interface Wireless IEEE 802.11b/g/n (Infrastructure Mode) IEEE 802.11g/n (Wireless Direct Mode) Ethernet Ethernet 10BASE-T/100BASE-TX Auto Negotiation Network Protocol (IPv4) ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), mDNS, WINS, (Common) NetBIOS name resolution, DNS Resolver, LPR/LPD, Custom Raw Port/Port9100, FTP Server, TFTP client and server, SNTP client, ICMP, LLMNR responder, SNMPv1/v2c Protocol (IPv6)

  • Page 162: Types Of Network Connections And Protocols

    Network Terms and Information Types of Network Connections and Protocols You will find basic information about the advanced network features of the Label Printer, along with general networking and common terms. The supported protocols and network features differ depending on the model you are using. Types of Network Connections Peer-to-Peer printing using TCP/IP In a Peer-to-Peer environment, each computer directly sends and receives data to each device.
  • Page 163 Network Terms and Information Network Shared printing In a Network Shared environment, each computer sends data via a centrally controlled computer. This type of computer is often called a “Server” or a “Print Server”. Its job is to control the printing of all print jobs. Network printer (your Label Printer) 1 Client computers...

  • Page 164: Configure Your Label Printer For A Network

    Network Terms and Information Configure Your Label Printer for a Network IP Addresses, Subnet Masks and Gateways To use the Label Printer in a networked TCP/IP environment, you must configure its IP address and subnet mask. The IP address you assign to the print server must be on the same network as your host computers. If it is not, you must correctly configure the subnet mask and the gateway address.
  • Page 165 Network Terms and Information Subnet mask Subnet masks restrict network communication.  For example, Computer 1 can communicate with Computer 2 • Computer 1 IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 • Computer 2 IP Address: 192.168.1.3 Subnet Mask: 255.255.255.0 The 0 in the Subnet mask signifies that there is no limit to communication at this part of the address. In the example above, this means that you can communicate with any device with an IP address that begins with 192.168.1.x.

  • Page 166: Wireless Network Terms And Concepts

    (how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless printer, it will not be able to connect to the wireless network. Make sure you configure these options carefully.
  • Page 167 Network Terms and Information TKIP  TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing, a message integrity check and rekeying mechanism.  Advanced Encryption Standard (AES) provides stronger data protection using a symmetric-key encryption. When [Communication Mode] is set to [Ad-hoc] Authentication Method Encryption Mode Open System...
  • Page 168 Network Terms and Information Authentication methods LEAP (For wireless network)  Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. and uses a user ID and password for authentication. EAP-FAST  EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunnel) has been developed by Cisco Systems, Inc.
  • Page 169 Network Terms and Information Encryption methods TKIP  TKIP (Temporal Key Integrity Protocol) provides a per-packet key mixing a message integrity check and rekeying mechanism.  Advanced Encryption Standard (AES) provides stronger data protection using a symmetric-key encryption. CKIP  The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.

  • Page 170: List Of Barcodes For The P-Touch Template Function

    List of Barcodes for the P-touch Template Function General Procedure for the P-touch Template Function The general procedure for using the P-touch Template function is described below. For more information on specifying the various settings, see Print Labels Using P-touch Template on page 50.

  • Page 171: List Of Barcodes For Specifying Settings

    List of Barcodes for the P-touch Template Function List of Barcodes for Specifying Settings For more information about using these barcodes for specifying the Label Printer settings, see Print Labels Using P-touch Template on page 50. Note • When using the barcodes in this list, set Trigger for P-touch Template Printing and Command Prefix Character to the factory settings in the P-touch Template Settings tool.
  • Page 172 List of Barcodes for the P-touch Template Function  For entering numbers  Preset template number Preset template 1 Preset template 2 Preset template 3 Preset template 4...
  • Page 173 List of Barcodes for the P-touch Template Function Preset template 5 Preset template 6 Preset template 7 Preset template 8 Preset template 9 Preset template 10  Select template  Number of serialized copies  Delimiter  Initialize template data ...

  • Page 174: Use The Brother Barcode Scanner (Optional: Pa-Br-001)

    Because the Brother Barcode Scanner (optional: PA-BR-001) has been set according to the P-touch Template Settings in the Printer Setting Tool, you can quickly use this Barcode Scanner without changing its settings. For information about using the Brother Barcode Scanner, see the instruction manual included with the Barcode Scanner.

Table of Contents