Brother QL-1060N Service Manual page 46

(4) Pull the harness out of the hole of the under cover.
(5) Remove the one screw and release the pin to remove the panel cover.
Pin
Screw
Hook
Fig. 3.1-23 Removing the Front Cover, Panel Cover and Front Side Cover (3)
(6) Remove the one screw and release the pin to remove the front side cover.
Front side cover
Hook
Screw
Fig. 3.1-24 Removing the Front Cover, Panel Cover and Front Side Cover (4)
Cutter unit ASSY
3
Panel cover
1
2
Pin
III- 18
Harness
2
1
Hole
Under cover
Cutter unit ASSY
Under cover