6 ] Installing The Power Supply Pcb And Main Pcb - Brother QL-1060N Service Manual

[ 6 ] Installing the Power Supply PCB and Main PCB

(1) Turn the machine upside down.
(2) Connect the power supply PCB and DC8V power PCB ASSY with the pin, and connect
the connector from the main PCB with the power supply PCB.
Note: Be careful not to break the pin between the power supply PCB and DC8V power
PCB ASSY.
DC8V power PCB ASSY
Pin
Power supply PCB
Fig. 3.2-27 Installing the Power Supply PCB and Main PCB (1)
(3) Put the inlet into the under cover.
Note 1: Make sure that the hooks of the inlet are locked securely.
Note 2: Assemble the inlet while paying attention to the direction of the ribs of the inlet.
(4) Place the power supply cord in the right position.
Power supply cord
Hook
Inlet
Hook
Fig. 3.2-28 Installing the Power Supply PCB and Main PCB (2)
Inlet
III- 43
Connector
Rib
Rib