8 ] Disassembling The Mecha Assy - Brother QL-1060N Service Manual

[ 8 ] Disassembling the Mecha ASSY

(1) Remove the release springs and retaining rings from both sides of the mecha ASSY and
remove the release levers L and R.
Retaining ring
(2) Release the hook to remove the double gear C from the mecha ASSY.
(3) Remove the retaining ring E4 to remove the double gear B from the mecha ASSY.
(4) Remove the retaining ring E2.5 to remove the double gear A from the mecha ASSY.
Release lever L
Release spring
Fig. 3.1-29 Disassembling the Mecha ASSY (1)
Mecha ASSY
Double gear A
Fig. 3.1-30 Disassembling the Mecha ASSY (2)
Mecha ASSY
Double gear B
Retaining ring E4
Double gear C
Retaining ring E2.5
III- 21
Release lever R
Release spring
Retaining ring
Hook