Table of Contents
Advertisement
Output menu
To access the output menu via the front panel control buttons
1.
Press the desired INPUT SELECT button.
2.
Press MENU.
3.
Press the
or
button (if necessary) to reach the output menu.
4.
Press ENTER.
5.
Use the
and
buttons and the ENTER key to select the setting you wish to adjust.
6.
Press ENTER to save once you've optimized the setting for the current input.
Resolution: Because the IN1402 can only scale up, you must choose an output resolution that is
greater than or equal to the input size, as well as one that is compatible with your monitor/display
device. The available resolution rates are listed on the page 15. Choose the appropriate resolution and
aspect ratio for your application.
Of all the settings on the IN1402, perhaps the most critical adjustment is the output resolution.
Setting the scaler to match the capabilities of your data display device will have an enormous
impact on the image quality. To achieve the optimum image on your display device, refer to the
instructions in Choosing the Optimal Output Resolution on page 13.
Size adjusts the output horizontal and vertical size. It shrinks the size to a percentage of the output
resolution selected. The IN1402 only scales up; choose an output size that will result in an image that
is greater than or equal to the input size (don't forget to save). This setting is useful to manually reduce
the height of the output signal when an anamorphic input signal is connected. The output size is
automatically reset anytime a new input aspect ratio is selected.
Position situates the output image on the monitor. The output position is automatically reset anytime
a new input aspect ratio is selected.
Sync Format:
RGBHV:--
RGBHV:++
RGBS:
RGsB:
Reset Output resets all output settings to factory default.
Advanced menu
To access the advanced menu via the front panel control buttons
Press the desired INPUT SELECT button.
1.
2.
Press MENU.
3.
Press the
or
button (if necessary) to reach the advanced menu.
4.
Press ENTER.
5.
Use the
and
buttons and the ENTER key to select the setting you wish to adjust.
6.
Press ENTER to save once you've optimized the setting for the current input.
Factory Reset returns all video and RS-232 settings for all inputs to their factory defaults.
Baud Rate allows RS-232 remote users to select the baud rate that matches their remote control device
system.
12
RGB with negative horizontal and vertical sync
RGB with positive horizontal and vertical sync
RGB with composite sync (with serrations)
RGB with sync on green (with serrations)
IN1402 User's Manual
Advertisement
Table of Contents
