Proximus Forum 500 User Manual page 52

Special Functions
Delay: This is the time that starts after the triggering event (mandown, no
movement, escape). If the triggering event is interrupted for at least
2 seconds during this time, the delay restarts.
The delay can be configured separately for each alarm type.
Pre alarm: This is the time where – if activated – an alarm tone is signalled on
the mobile unit before the alarm call number is dialled. To switch off the
alarm tone (and thus deactivate the alarm), you have to press the
Esc softkey. During pre-alarm, a display shows how much time remains
until the alarm call number is dialled.
If the triggering event is interrupted for at least 4 seconds (2 seconds
for the no movement alarm) during this time, the delay restarts.
The escape alarm can only be cancelled via the
Setting the time for the pre-alarm is done for all alarm types together.
Event
Mandown, No movement, Escape
detected
Delay
Other alarm parameter settings
Alarm number: If the SOS emergency call number is predefined by the
system, this menu entry does not appear.
Forum 500 / Forum 5000 systems only: Always save the SOS
emergency call number with the prefixed R-key function (enquiry/
hold). Then an emergency call can also be made during a call
(depending on mobile unit – see above). Press the
to enter the R key function.
Other systems: The "Hold" function may be generated using other
codes on other systems. The respective system documentation
provides information on suitable programming.
If there is no alarm number saved, the SOS emergency call number – if
there is one – is called alternatively.
50
Pre alarm
with/without alarm
tone on the mobile unit
Esc softkey.
Dialling of the
alarm call number
hash key 3 times
Basic Functions