Proximus Forum 500 User Manual page 51

Special Functions
● Escape alarm
All three alarm types can be activated simultaneously. The alarm call number
is the same for all types of alarm. If there is no alarm call number saved, the
SOS emergency call number saved to the emergency call key / SOS key is
used.
The first type of alarm detected is activated. The symbol appears in the
first display line when the sensor alarms are activated. One way you can
determine which alarm is active is in the Active Features menu (see
page 108).
Please note that to ensure dependable functioning, the device should be worn
(belt clip) as exposed as possible (not in your pocket).
Mandown
Usually the mobile unit is worn vertically, e.g. with the belt clip directly
fastened to the person's body. The position measurement is conducted
continuously and checks to ensure the device is still upright. If the device is
45° from being in the vertical, an alarm is triggered after a defined time
interval, as there may be an emergency.
No movement
This alarm is triggered when the mobile unit is motionless for a definable time
interval (no device movement or movement of the person wearing the
device). Sensor sensitivity can be configured in three levels. It is recommended
to test the sensitivity of the no movement alarm with the person being
monitored in order to guarantee reliable operation.
When loading the device in the charger or via the USB port, the no movement
alarm is deactivated.
Escape
The escape alarm is triggered when the sensor detects intense movements of
the mobile unit during a configurable time interval. As with the no movement
alarm, the sensor sensitivity can be set at three levels. It is recommended to
test the sensitivity of the escape alarm with the person being monitored in
order to guarantee reliable operation.
Setting alarm times
The settings are in the > Security > Alarm Sensor menu (see page 138).
Alarm times are comprised as follows:
Basic Functions 49