Proximus Forum 500 User Manual page 141

what the setting, calls from the alarm call number or the SOS
emergency call number are automatically accepted and
prealarm ended.
Handsfree in alarm: You can configure whether an alarm call is done in
handsfree or receiver operation. This setting also applies to the
emergency call via the SOS/emergency call key.
Pre alarm: Use
off.
Alarm tone: The pre-alarm can be sounded with or without an
Vibrator: You can set whether the pre-alarm should also be
Duration: You can set the time (10 sec ... 75 sec) that should
Mandown: Use
Alarm in conversation: Switch off this feature to prevent alarm
Delay: Allows you to set the amount of time the handset can
Angle: Select the inclination angle of the handset in which the
The Device Menu
Change to switch the pre-alarm for all alarm types on or
alarm tone on the handset. If the alarm tone is activated,
the signalling volume increases progressively.
signalled with vibrator call.
elapse before the emergency number is dialled. An
increasingly loud ring tone (alarm tone) is signalled on the
handset during this time (provided it is activated).
During the pre-alarm the alarm can still be cancelled with
the following measures.
– With mandown alarm: By pressing
handset vertical for at least 4 seconds.
– With the escape alarm: By pressing
– With the no movement alarm: By pressing
shaking the device sideways for 1 – 2 seconds.
Change to switch the mandown-alarm on or off.
activation by mistake during an active call.
remain outside the vertical position before a pre-alarm is
triggered (1 sec ... 75 sec).
Please switch "Vibra call" off in the "Ringer settings" (see
page 113) if you wish to use the mandown alarm.
alarm will be triggered.
"Security" Menu
Esc or holding the
Esc .
Esc or
139