Proximus Forum 500 User Manual page 143

Repeat alarm: This is the time interval after which another prealarm
including subsequent dialling of the alarm call number is
executed, e.g. because calling the alarm call number was
cancelled (Off, 5 sec ... 240 sec). Use
tition of an alarm on or off.
Reset to default: You can reset various areas of your settings back to factory
settings.
Personal directory: The entries in your personal phone book are
deleted after a confirmation prompt.
VIP-list: the VIP list (see page 45) is deleted.
New info: Entries in the Info menu (see page 105) are deleted after a
confirmation prompt.
All lists: All lists (caller list, redial list) are deleted after a confirmation
prompt.
Key programming: All programmed keys will be reset to the status
they had on delivery.
User settings: All user settings (e.g. display language, display settings)
are returned to factory setting after a confirmation prompt.
All: The mobile unit is reset to factory settings after a confirmation
prompt. Device registration on the system and the PIN are not
affected.
The Device Menu
– Low sensibility means: The alarm is triggered only by
rapid or jolting movements.
– High sensibility means: Slower movements are enough
to trigger the alarm.
Please switch "Vibra call" off in the "Ringer settings" (see
page 113) if you wish to use the escape alarm.
"Security" Menu
Change to switch the repe-
141