Proximus Forum 500 User Manual page 137

on setting (permanent) if you regularly charge the mobile unit
after usage.
Display: This is for setting how long full display illumination (e.g. after
each key press) remains on (10 ... 240 sec).
Keyboard: This is where you set how long keyboard illumination
remains on after each key press (Light off, 1 ... 240 sec).
Charger: This is where you set how long display illumination remains on
when the device is placed on the charger (Light off, 1 ... 240 sec).
Conversation: To save battery power, you can define how the display is
illuminated during a call connection (Light off, Light on, Light
dimmed).
LED indications: You can switch LED display on/off as desired (see also
page 27).
Life indication: LED slowly flashing green or orange.
Incoming call: LED quickly flashing green or orange with
Out of range: Red LED flashing quickly when you leave the radio
Charge indication: LED lights up orange when the battery is
Info: Slowly flashing red LED, e.g. when there is a new entry on
Handsfree: Green LED lights up when the loudspeaker is on.
Appointment: Slowly flashing red LED when appointment
Alarm clock: Slowly flashing red LED when wake-up time
List access: The caller list and / or the re-dial list are usually managed on
your mobile unit (setting: Local). If a list is also stored on the communi-
cations system (setting: PBX), you can select which list you wish to
display. When Automatic is selected, the device always shows the PBX
list (if available) of the communications system. If this list is not
available, Local is automatically selected. Selecting the PBX list (or
Automatic / PBX) is a good idea if your mobile unit is operated parallel
The Device Menu
incoming calls.
range of the system.
charging, changing to green when charging complete.
the caller list.
signalled.
signalled.
"Settings" Menu
135