Vehicle Mounted Cradle; Serial Port - Honeywell MX7 Tecton User Manual

Vehicle Mounted Cradle

Weight
Dimensions
Operating Temperature
Storage Temperature
Humidity

Serial Port

The connector is industry-standard RS232 and is a PC/AT standard 9-pin D male connector.
Note: Tethered scanners must be connected to powered cradles.
Pin Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI or Power
Note: Pin 9 of this port is connected to +5 VDC and only approved Honeywell cables are to be used for communication
between the cradle and external devices.
334
2 lbs. 15.2 oz / 1.34 kg
Height 12.5 in. (31.8 cm)
Width 6.0 in. (15 cm)
Depth 5.0 in. (13 cm)
14° F to 122° F ( -10° C to 50° C)
-4° F to 158° F (-20° C to 70° C)
5% to 90% (non-condensing) at 104° F / 40° C
Description
Data Carrier Detect
Received Data – Input
Transmitted Data – Output
Data Terminal Ready
Signal/Power Ground
Data Set Ready
Request to Send
Clear To Send
+5 VDC sourced by the Cradle