Preparing The Powered Vehicle Mounted Cradle For Use; Quick Start - Honeywell MX3Plus Cradle Reference Manual

Preparing the Powered Vehicle Mounted Cradle for Use

The powered vehicle mounted assembly should be secured to an area in the vehicle where it:
Does not obstruct the driver's vision or safe vehicle operation .
l
Will be protected from rain or inclement weather.
l
Will be protected from extremely high concentrations of dust or wind-blown debris.
l
Can be easily accessed by a user seated in the driver's seat while the vehicle is not in operation.
l

Quick Start

The following list outlines, in a general way, the process to follow when preparing the MX3Plus powered vehicle mounted
cradle for use. Refer to the following sections in this document for more details.
1. Attach the RAM base vehicle mounting assembly to the vehicle.
2. Attach the RAM arm assembly to the vehicle mounting assembly.
3. Attach the MX3Plus assembly to the RAM arm.
4. Adjust the MX3Plus to the best viewing angle.
5. Connect antenna. Note: The vehicle remote mount antenna cannot be used by devices with an internal antenna.
6. Connect peripheral cables.
7. Secure the DC/DC or 12 VDC power connector from the vehicle mounted power supply to the Power port.
8. Secure all cables in strain relief cable clamps.
The MX3Plus in the powered vehicle mounted assembly is ready for use.
3-2