Input Panel - Honeywell MX7 Tecton User Manual

When the keypad backlight is set to Follow the touch screen backlight, the keypad backlight turns off when the touch
screen backlight dims.
Adjust backlight brightness by moving the slider. Changes are in effect immediately.

Input Panel

Start > Settings > Control Panel > Input Panel
Set the current MX7 Tecton keys and data input method.
Setting
Input Method
Allow applications to change input panel state Enabled
Options button
Keys
Use gestures
Use this panel to make the Input Panel (on-screen keyboard) or the physical keypad primarily available when entering data
on any screen. Selecting Keyboard enables both.
Tap the Options button to set the size of the keys displayed on-screen and whether Transcriber gestures are enabled or dis-
abled.
Transcriber
1. When choosing Transcriber as the Current Input Method, first tap the Keyboard icon in the status bar.
2. Select Transcriber from the pop-up menu.
3. Then open the Input control panel and tap the Options button.
Transcriber Options (Start > Settings > Control Panel > Input Panel) are available only when Transcriber is selected as
the active input method. Tap the "?" button or the Help button to access Transcriber Help.
Default
Keyboard
Small keys
Disabled
67