About; Easy Pairing And Auto-Reconnect - Honeywell MX7 Tecton User Manual
With microsoft windows embedded ce 6.0
Hide thumbs
Also See for MX7 Tecton:
- Reference manual (366 pages) ,
- User manual (354 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Option
Auto Reconnect
About
This panel lists the pre-assigned Computer Friendly Name (that other devices may discover during their Discovery and Query
process), the Bluetooth client MAC address, and software version levels. The data cannot be edited by the user.
Easy Pairing and Auto-Reconnect
The Bluetooth module can establish relationships with new devices after the user taps the Discover button. It can auto-recon-
nect to devices previously known but which have gone out of range and then returned within range.
Note: Configuration elements are persistent and stored in the registry.
Setup the Bluetooth module to establish how the user is notified by easy pairing and auto-reconnect events.
AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it stop other Bluetooth-enabled
devices from pairing with the MX7 Tecton while AppLock is in control.
Function
This option is Enabled (checked) by default. This option controls the overall mobile Bluetooth
device reconnect behavior.
When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automatically dis-
abled and dimmed.
When Auto Reconnect is disabled (unchecked), no devices are reconnected in any situation.
The status of Auto Reconnect on Boot is ignored and no devices are reconnected on boot. The
status of Clear Pairing Table on Boot controls whether the pairing table is populated on boot.
When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled (un-
checked), devices are not reconnected on boot, but are reconnected in other situations (ex-
ample: return from out-of-range).
When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled
(checked), devices are not reconnected on boot, but are reconnected in other situations (ex-
ample: return from out-of-range). The pairing table is cleared on boot. The status of Auto Re-
connect on Boot is ignored and the option is automatically disabled (unchecked) and dimmed.
139
Advertisement
Table of Contents
