Honeywell MX7 Tecton User Manual page 332

32 key Numeric-Alpha Keymap
.
To get this Key / Function
Power / Suspend
Field Exit (default is VK_PAUSE)
MAP = Mappable
=
(
!
)
Volume Adjust Mode
Display Backlight Brightness
Adjust Mode
Toggle Alpha Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt Mode
Control Mode
Esc
Space
Enter
Scan Mode
CapsLock (Toggle)
326
• The following keymap is used on an MX7 Tecton that is NOT running a Terminal
Emulator. Terminal emulators use a separate keymap.
• When using a sequence of keys that require an alpha key, first press the Alph key. Use
the Shft sticky key or the Caps key sequence (Blue+Tab) for upper case alphabetic
characters.
• Pressing the Alph key forces "Alpha" mode for the 2,3,4,5,6,7,8, and 9 keys. The 1 and
0 keys continue to place a 1 and 0 into the text field.
• To create a combination of numbers and letters before pressing Enter, remember to tap
the Alph key to toggle between Alpha and Numeric mode.
• When using a sequence of keys that do not include the Alph key but does include a
sticky key, press the sticky key first then the rest of the key sequence.
• For those keymaps that require remapping (MAP), keys can be remapped using the
KeyPad Panel (Start > Settings > Control Panel > KeyPad).
• Pressing the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns
the device On (when Off) or places it in Suspend (when On).
Power
Blue (MAP)
Orange
Blue
Orange
Blue
Orange
Blue
Alph
Blue
Orange
Shft
Alt
Ctrl
Blue
Spc
Enter
Scan
Blue
Press these Keys in this Order
Shft (MAP) Diamond #1
Shft (MAP) Diamond#2
Default is Mappable
Shft (MAP) Diamond#2
Default is Mappable
Shft (MAP) Diamond#3
Default is Mappable
Shft (MAP) Diamond#3
Default is Mappable
Scan Up Arrow
Down Arrow
Scan Up Arrow
Down Arrow
Alt
Tab